9.A1D15 Cembre EWO IP66 Grey 1 hole 15 - 16mm cable clamp Grommet For Split Cable Entry Systems

Why Choose the Cembre EWO 9.A1D15 IP66 Grey 1 Hole 15 - 16 mm Cable Clamp Grommet

The Cembre 9.A1D15 is a grey single hole cable clamp grommet for the EWO split cable entry system. It routes and seals one pre terminated cable of 15 - 16 mm diameter, helping you maintain the enclosure’s IP66 rating and a tidy, professional finish.

Built to the EWO Type A module format, the 9.A1D15 drops into the frame from above during final assembly. If your layout changes later, simply swap the grommet without reworking the panel cut out or removing cable connectors, supporting fast builds and easy retrofits.

Key Features

• 1 hole grommet for a single cable sized 15 - 16 mm.
• Clamp profile grips the sheath for strain relief and reliable sealing.
• Type A small module, nominal 20 × 20.6 mm.
• Supports system IP66 when used with EWO frames with overmoulded seal.
• Fast drop in assembly for pre terminated cables, no cut out rework.
• Grey colour for easy circuit identification; black options available in the range.

Technical Specifications

• Manufacturer: Cembre
• Series: EWO split cable entry system
• Model: 9.A1D15
• Function: Type A single hole cable clamp grommet
• Cable diameter range: 15 - 16 mm
• Module size: 20 × 20.6 mm (Type A)
• Material: Thermoplastic elastomer (TPE)
• Colour: Grey
• Ingress protection: IP66 with EWO frame and seal
• Operating temperature (system): −40 to +140 °C (frame); suitable for industrial applications
• Approvals: EWO family supports CE, UKCA, UL and RINA certifications
• Notes: Interchangeable with other Type A grommets for future cable layout adjustments.

Certifications

When installed in an EWO frame, the system achieves IP66 sealing via the frame’s overmoulded gasket. EWO frames and grommets are supported by widely used industrial approvals across the range.

Comparison and Selection Notes

Choose 9.A1D15 for one 15 - 16 mm cable. For smaller sizes see 9.A1D1 to 9.A1D14; for larger cables use higher numbered 9.A1D* variants up to 16.5 mm. To route multiple cables in the same footprint choose 9.A2D* or 9.A4D*, or blank unused positions with 9.AD0.

Frequently Asked Questions

• What is the 9.A1D15 used for
• Which frames does it fit
• Does it maintain IP66
• Can I replace it later with another size

Applications

• Control panel wiring for 15 - 16 mm power or control cables.
• Industrial machinery requiring sealed entries for larger diameter leads.
• OEM equipment and automation systems using pre terminated harnesses.

Trusted By Panel Builders

"Handles thick control cables well. Firm clamp, quick installation and dependable IP66 sealing." Panel Builder, UK