9000.10/3 Cembre EWO IP66 Black Rectangluar Split Cable Entry Systems

Why Choose the Cembre EWO 9000.10/3 IP66 Rectangular Split Cable Entry Frame

The Cembre EWO 9000.10/3 is a black rectangular split cable entry frame for routing pre-terminated cables through enclosures while maintaining reliable IP66 protection. Its glass fibre reinforced PA6.6 body with an overmoulded inner seal keeps panels neat and ingress protected without needing a separate outer gasket.

Built around Cembre’s Plug & Fix quick open mechanism and the Stop Plinth seal protection, the frame can be installed after cables are laid and then closed around the grommets. This speeds up wiring, reduces rework risk and delivers a tidy, professional finish for OEMs and panel builders.

Key Features

• Rectangular split frame with 3 small grommet positions.
• IP66 ingress protection from the integrated overmoulded seal.
• Glass fibre reinforced PA6.6 body with TPE elastomer sealing element.
• Plug & Fix quick opening for fast retrofit on pre-terminated cables.
• Stop Plinth design prevents seal over compression for lasting protection.
• Silicone free, halogen free; UL 94 V0 self extinguishing rating.

Technical Specifications

• Manufacturer: Cembre
• Series: EWO Easy Wire Organiser
• Model: 9000.10/3
• Colour: Black
• Ingress protection: IP66
• Material: Polyamide PA6.6, glass fibre reinforced; overmoulded TPE seal
• Operating temperature: Frame -40 to +140 °C (static); Grommets -40 to +100 °C (static)
• Wall cut out size: 65 mm x 36 mm or 46 mm
• Fixing hole centres: 83 mm horizontal x 32 mm vertical
• Fixing holes: 5.5 mm diameter, for M5 screws
• Grommet capacity: 3 small grommets (Version A 20.6 x 20 mm)
• Screw tightening torque: 2.2 N·m
• Compliance: EN 62444 cable management
• Standards and approvals: CE, UKCA, UL (UL50) Type 1, 12, 4X indoor, RINA; EN 45545 2; UV resistance ISO 4892 2A
• Notes: External seal not required. Use with Cembre EWO interchangeable grommets to suit cable diameters.

Certifications

Certified to CE, UKCA and UL environmental types 1, 12 and 4X indoor. Materials and sealing meet EN 60529 IP66 and EN 62444 requirements with UL 94 V0 flammability and EN 45545 2 fire behaviour ratings.

Comparison and Selection Notes

Choose 9000.10/3 when you need a compact rectangular frame with three small grommet positions. For six small grommets select 9000.10/6. For square apertures choose 9000.Q/1 or 9000.Q/4. Pair with matching EWO grommets for correct sealing and cable retention.

Frequently Asked Questions

• What is the 9000.10/3 used for
• How does it achieve IP66 without an external seal
• What panel cut out is required
• Which approvals does it carry
• Which grommets are compatible
• What screws and torque should I use

Applications

• Electrical panels and machine control cabinets.
• Industrial automation and sensor cabling.
• Drives, power supplies and I/O wiring where rework and maintenance access are needed.
• General enclosure cable management requiring reliable IP66 sealing.

Trusted By Customers Worldwide

"Neat, quick to install and ideal for smaller harness counts. The integrated seal keeps things simple." Senior Panel Builder, UK