9.A2D4 Cembre EWO IP66 Grey 2 hole 4 - 5mm cable clamp Grommet For Split Cable Entry Systems

Why Choose the Cembre EWO 9.A2D4 IP66 Grey 2 Hole 4 - 5 mm Cable Clamp Grommet

The Cembre 9.A2D4 is a grey two hole cable clamp grommet for the EWO split cable entry system. It routes and seals two pre terminated cables each in the 4 - 5 mm diameter range, helping you maintain an enclosure’s IP66 rating while keeping layouts compact and professional.

Built to the EWO Type A small module format, the 9.A2D4 drops into the frame from above during final assembly. If your layout changes, simply swap the grommet without reworking the panel cut out or removing connectors, enabling quick builds and straightforward retrofits.

Key Features

• 2 holes for two cables sized 4 - 5 mm each.
• Integrated clamp geometry provides strain relief and reliable sealing.
• Type A small module, nominal 20 × 20.6 mm.
• Supports system IP66 when used with compliant EWO frames with overmoulded seal.
• Ideal for pre terminated cables; no rework of cut outs or connectors.
• Grey colour for circuit identification; black options available across the range.

Technical Specifications

• Manufacturer: Cembre
• Series: EWO split cable entry system
• Model: 9.A2D4
• Function: Type A two hole cable clamp grommet
• Cable diameter range: 4 - 5 mm per hole
• Module size: 20 × 20.6 mm (Type A)
• Material: Thermoplastic elastomer (TPE)
• Colour: Grey
• Ingress protection: IP66 with EWO frame
• Operating temperature (system): −40 to +140 °C (frame rating)
• Approvals: Part of the EWO family with CE, UKCA, UL and RINA approvals
• Notes: Interchangeable with other Type A grommets, including 1 hole 9.A1D* and 4 hole 9.A4D* variants, or blank 9.AD0.

Certifications

When installed in a compatible EWO frame, the system achieves IP66 ingress protection via the frame’s overmoulded gasket. The wider EWO platform is supported by CE, UKCA, UL and RINA approvals.

Comparison and Selection Notes

Choose 9.A2D4 to route two cables of 4 - 5 mm each in a single Type A module. For single cable entries select 9.A1D*. For four small cables in the same footprint consider 9.A4D*. Use 9.AD0 to blank unused positions.

Frequently Asked Questions

• What is the 9.A2D4 used for
• Which frames does it fit
• Does it maintain IP66
• Can I swap it later for a different grommet

Applications

• Sensor and instrumentation pairs routed side by side.
• Twin signal or control leads in compact control cabinets.
• OEM equipment needing sealed, pre terminated twin cable entries.

Trusted By Panel Builders

"Neat solution for paired 4 mm cables. Fast to fit and keeps the frame sealed to IP66." Panel Builder, UK