9.A1D9 Cembre EWO IP66 Grey 1 hole 9 - 10mm cable clamp Grommet For Split Cable Entry Systems

Why Choose the Cembre EWO 9.A1D9 IP66 Grey 1 Hole 9 - 10 mm Cable Clamp Grommet

The Cembre 9.A1D9 is a grey single hole cable clamp grommet for the EWO split cable entry system. It seals and supports one pre terminated cable in the 9 - 10 mm diameter range, maintaining the enclosure’s IP66 protection and enabling tidy, safe routing in control cabinets and machinery.

As part of the Type A module range, the 9.A1D9 simply clips into EWO frames from above during assembly. It allows installers to add or swap cables later without reworking panel cut outs or removing connectors, giving panel builders flexibility and efficiency.

Key Features

• 1 hole grommet for one cable sized 9 - 10 mm.
• Clamp design provides sealing and strain relief on the sheath.
• Type A small module, nominal 20 × 20.6 mm.
• Maintains IP66 ingress protection with EWO frames.
• Quick drop in assembly for pre terminated cables.
• Grey option for circuit identification; black versions available in the same range.

Technical Specifications

• Manufacturer: Cembre
• Series: EWO split cable entry system
• Model: 9.A1D9
• Function: Type A single hole cable clamp grommet
• Cable diameter range: 9 - 10 mm
• Module size: 20 × 20.6 mm (Type A)
• Material: Thermoplastic elastomer (TPE)
• Colour: Grey
• Ingress protection: IP66 when fitted in an EWO frame
• Operating temperature (system): −40 to +140 °C (frame); grommets suitable for industrial use
• Approvals: CE, UKCA, UL (cURus) and RINA approvals as part of the EWO system
• Notes: Easily swapped with other Type A grommets or blanks to suit future cable changes.

Certifications

The 9.A1D9 forms part of the certified Cembre EWO system, delivering IP66 ingress protection and meeting CE, UKCA, UL and RINA requirements for use in industrial and marine applications.

Comparison and Selection Notes

Use 9.A1D9 for a single 9 - 10 mm cable. For smaller sizes see 9.A1D1 – 9.A1D8; for larger cables select higher numbered 9.A1D* grommets up to 16.5 mm. To route multiple cables in the same footprint use 9.A2D* or 9.A4D*. Blank unused positions with 9.AD0.

Frequently Asked Questions

• What is the 9.A1D9 used for
• Which frames does it fit
• Does it maintain IP66
• Can I change it later for another grommet

Applications

• Control cabinet wiring with 9 - 10 mm power or data leads.
• Industrial machinery requiring sealed cable entries for medium size cables.
• OEM equipment using pre terminated harnesses where flexibility is needed.

Trusted By Panel Builders

"Secure fit for 9 mm cables and quick to assemble. Keeps our panels neat and IP66 rated." Panel Builder, UK