9.A1D4 Cembre EWO IP66 Grey 1 hole 4 - 5mm cable clamp Grommet For Split Cable Entry Systems

Why Choose the Cembre EWO 9.A1D4 IP66 Grey 1 Hole 4 - 5 mm Cable Clamp Grommet

The Cembre 9.A1D4 is a grey single hole cable clamp grommet for the EWO split cable entry system. It securely routes and seals one pre terminated cable in the 4 - 5 mm diameter range, helping you maintain the enclosure’s IP66 rating and a neat, professional finish.

Built to the EWO Type A small module format, the 9.A1D4 drops into the frame from above during final assembly. If your layout changes later, simply swap the grommet without reworking the panel cut out or removing connectors.

Key Features

• 1 hole grommet for a single cable sized 4 - 5 mm.
• Clamp profile grips the sheath for strain relief and reliable sealing.
• Type A small module, nominal 20 × 20.6 mm.
• Supports system IP66 when used with EWO frames with overmoulded seal.
• Fast drop in assembly for pre terminated cables, no cut out rework.
• Grey colour for easy circuit identification; black options available in the range.

Technical Specifications

• Manufacturer: Cembre
• Series: EWO split cable entry system
• Model: 9.A1D4
• Function: Type A single hole cable clamp grommet
• Cable diameter range: 4 - 5 mm
• Module size: 20 × 20.6 mm (Type A)
• Material: Thermoplastic elastomer (TPE)
• Colour: Grey
• System ingress protection: IP66 with a compliant EWO frame
• Operating temperature (system): frame −40 to +140 °C; grommets suitable for industrial environments
• Approvals: Part of the EWO family used with CE, UKCA, UL and RINA compliant frames
• Notes: Mix with other Type A grommets to match your cable set. Replace later without disturbing the wiring.

Certifications

When installed in an EWO frame, the system achieves IP66 sealing via the frame’s overmoulded gasket. EWO frames and grommets are supported by widely used industrial approvals across the range.

Comparison and Selection Notes

Choose 9.A1D4 for one 4 - 5 mm cable. For smaller sizes see 9.A1D1 to 9.A1D3; for larger cables use higher numbered 9.A1D* variants up to 16.5 mm. To route multiple cables in the same footprint choose 9.A2D* or 9.A4D*, or blank unused positions with 9.AD0.

Frequently Asked Questions

• What is the 9.A1D4 used for
• Which frames does it fit
• Does it maintain IP66
• Can I replace it later with another size

Applications

• Sensor and instrument leads in control panels.
• Industrial machinery wiring requiring compact sealed entries.
• OEM equipment using pre terminated small diameter cables.

Trusted By Panel Builders

"Ideal for 4 to 5 mm sensor cables. It clamps firmly, keeps the entry sealed and installs in seconds." Panel Builder, UK