9.A1D5 Cembre EWO IP66 Grey 1 hole 5 - 6mm cable clamp Grommet For Split Cable Entry Systems

Why Choose the Cembre EWO 9.A1D5 IP66 Grey 1 Hole 5 - 6 mm Cable Clamp Grommet

The Cembre 9.A1D5 is a grey single hole cable clamp grommet developed for the EWO split cable entry system. It is designed to seal and support one pre terminated cable in the 5 - 6 mm diameter range, preserving the enclosure’s IP66 rating and delivering safe, professional routing.

Designed to the Type A EWO module standard, the 9.A1D5 clips directly into the frame from above during final assembly. It allows quick upgrades and cable changes without panel rework, offering flexibility and reliability for panel builders and OEM applications.

Key Features

• 1 hole grommet for a single cable of 5 - 6 mm diameter.
• Integrated clamp provides strain relief and tight sealing around the sheath.
• Type A small format, nominal 20 × 20.6 mm.
• Ensures IP66 protection when used with an EWO split frame.
• Tool free installation with pre terminated cables, no rework required.
• Grey colour for clear circuit identification; black versions also available.

Technical Specifications

• Manufacturer: Cembre
• Series: EWO split cable entry system
• Model: 9.A1D5
• Function: Type A single hole cable clamp grommet
• Cable diameter range: 5 - 6 mm
• Module size: 20 × 20.6 mm (Type A)
• Material: Thermoplastic elastomer (TPE)
• Colour: Grey
• Ingress protection: IP66 with EWO frame and seal
• Operating temperature (system): −40 to +140 °C (frame); suitable for industrial applications
• Approvals: EWO family supports CE, UKCA, UL and RINA certifications
• Notes: Interchangeable with other Type A grommets for future cable layout adjustments.

Certifications

Part of Cembre’s EWO certified system, achieving IP66 sealing when used in compliant frames. The family is covered by CE, UKCA, UL (cURus) and RINA approvals, supporting use in industrial and marine settings.

Comparison and Selection Notes

Select 9.A1D5 for a single cable of 5 - 6 mm diameter. For smaller sizes use 9.A1D1 – 9.A1D4; for larger cables choose higher numbered 9.A1D* variants. For two or four cables per module see 9.A2D* or 9.A4D*. To close unused slots use 9.AD0.

Frequently Asked Questions

• What is the 9.A1D5 used for
• Which frames does it fit
• Does it maintain IP66
• Can I replace it later with another grommet

Applications

• Control panel wiring for 5 - 6 mm sensor or signal cables.
• Industrial machinery requiring sealed entries for medium diameter leads.
• OEM equipment and automation systems using pre terminated cable harnesses.

Trusted By Panel Builders

"Great for 5 mm sensor leads, fits perfectly and keeps the frame sealed to IP66." Panel Builder, UK