9.A1D10 Cembre EWO IP66 Grey 1 hole 10 - 11mm cable clamp Grommet For Split Cable Entry Systems

Why Choose the Cembre EWO 9.A1D10 IP66 Grey 1 Hole 10 - 11 mm Cable Clamp Grommet

The Cembre 9.A1D10 is a grey single hole cable clamp grommet for the EWO split cable entry system. It is designed for routing and sealing one pre terminated cable with a 10 - 11 mm diameter, preserving the enclosure’s IP66 protection while enabling efficient and safe cable management.

Conforming to the Type A module standard, the 9.A1D10 can be clipped into place from above during installation. It allows installers to adapt cable entries quickly without reworking the panel cut out or disturbing existing wiring, making it ideal for flexible panel building and OEM environments.

Key Features

• 1 hole grommet for a single cable of 10 - 11 mm diameter.
• Clamping profile ensures strain relief and secure sealing around the sheath.
• Type A module format, nominal 20 × 20.6 mm.
• Maintains IP66 protection when used in an EWO frame with integrated seal.
• Drop in installation, suitable for pre terminated cables.
• Available in grey for circuit identification; black options available in the family.

Technical Specifications

• Manufacturer: Cembre
• Series: EWO split cable entry system
• Model: 9.A1D10
• Function: Type A single hole cable clamp grommet
• Cable diameter range: 10 - 11 mm
• Module size: 20 × 20.6 mm (Type A)
• Material: Thermoplastic elastomer (TPE)
• Colour: Grey
• Ingress protection: IP66 with compliant EWO frame
• Operating temperature (system): −40 to +140 °C (frame); grommets suitable for harsh industrial use
• Approvals: CE, UKCA, UL (cURus) and RINA approvals as part of the EWO range
• Notes: Can be swapped with other Type A grommets or blanks to suit evolving layouts.

Certifications

The 9.A1D10 is part of the certified Cembre EWO platform, delivering IP66 ingress protection and covered by CE, UKCA, UL and RINA approvals for use in industrial, automation and marine applications.

Comparison and Selection Notes

Choose 9.A1D10 for a single cable sized 10 - 11 mm. For smaller cables use 9.A1D1 – 9.A1D9; for larger diameters select higher numbered 9.A1D* grommets up to 16.5 mm. Multi cable routing is possible with 9.A2D* or 9.A4D* grommets. To close unused slots, use 9.AD0.

Frequently Asked Questions

• What is the 9.A1D10 used for
• Which frames does it fit
• Does it maintain IP66
• Can I swap it later for another size

Applications

• Control cabinets routing 10 - 11 mm cables.
• Industrial machinery needing sealed medium size cable entries.
• Automation systems and OEM equipment using pre terminated harnesses.

Trusted By Panel Builders

"Perfect for mid size power and data leads. Installs in seconds and keeps enclosures IP66 rated." Panel Builder, UK