abb softstarter PSTX570-600-70 pstx (600v) range 570 amp

Why Choose the PSTX570-600-70 [1SFA898117R7000]

The softstarter PSTX570-600-70 has a rated maximum operational current of 570 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Technical Specification

• Rated Operational Voltage: 208–600 V AC.
• Rated Operational Current: 570 A (inline connection), 987 A (inside delta connection).
• Soft Start/Stop Control: Three-phase voltage or torque ramp soft start and stop.
• Built-in Bypass: For energy saving and easy installation.
• Control Voltage: 100–250 V AC; control circuit voltage 24 V DC.
• Communication Options: Modbus RTU, TCP, Ethernet IP, Profinet, Profibus, EtherCAT, CANopen, BACnet, with optional ANYBUS modules.
• Degree of Protection: IP00 on main terminals; detachable full graphic display rated IP66, designed for outdoor use.
• Terminal Type and Size: Main circuit bars; control and supply circuits accommodate rigid cables up to 2.5 mm².
• Overload Protection: Integrated electronic overload with additional protections including earth fault, phase reversal, and voltage imbalance.
• Weight: 27 kg.

Trusted By Customers Worldwide

"Specified by UK panel builders for dependable control." Controls Engineer, UK