abb softstarter PSTX1050-690-70 pstx (690v) range 1050 amp

Why Choose the PSTX1050-690-70 [1SFA898220R7000]

The softstarter PSTX1050-690-70 has a rated maximum operational current of 1050 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Technical Specification

• Rated Operational Voltage: 208 to 690 V AC.
• Rated Operational Current: 1050 A (in-line connection), 1810 A (inside delta connection).
• Rated Power Output: Up to 1000 kW (in-line), up to 1700 kW (inside delta) depending on voltage.
• Control Supply Voltage: 100 to 250 V AC, 50/60 Hz.
• Protection Rating: Main terminals IP00, detachable display IP66 with 4x outdoor rating.
• Terminal Type and Size: Main circuit bars; control circuit rigid cable up to 2.5 mm²; tightening torque 45 N·m.
• Bypass and Signal Relays: Built-in bypass with run, bypass, fault, and overload relays (NO contacts).
• Key Functions: Soft start/stop with torque or voltage ramp, current limit, electronic overload, kickstart, braking, jog, emergency pump mode.
• Communication Interfaces: Modbus RTU/TCP, EtherCAT, Profibus, Profinet, Ethernet IP, CANopen, DeviceNet, BACnet options.
• Mechanical Weight: 62.3 kg.

Trusted By Customers Worldwide

"Specified by UK panel builders for dependable control." Controls Engineer, UK