723110 Lutze Uninterrupted DC power supply Input: DC 24 V, Output: max. DC 10 A
Uninterrupted DC power supply
DC UPS for lead batteries
Input: DC 24 V, Output: max. DC 10 A
Technical Data |
Input |
Input voltage |
DC 26 – 28.5 V |
Input current |
DC 3 – 10 A |
Status display input |
LED green: PS OK, LED red: Reverse polarity |
LED green: Battery OK, LED red: Battery low |
Parameterisation |
Charging current adjustable by jumper |
Protection device Input |
None |
Energy storage |
Memory type |
Chemical (lead based) |
Nominal battery voltage |
DC 24 V |
Max. charging current |
DC 2 A or DC 4 A |
Max. battery capacity |
75 % @ 26 V, 85 % @ 27 V, 100 % @ 28 V |
Max. output current |
10 Amp |
Backup time |
Depends on battery and charging current |
Fuse for memory medium |
Vehicle fuse 15 A / 32 V, Mini Type |
Deep discharge protection |
18.5 V ± 0.5 V |
Output |
Rated voltage UN |
DC 24 V |
Output voltage |
DC 20 - 28 V |
Max. output current |
DC 10 A |
Status indication |
Status display output |
LED yellow: Load OK |
Monitoring |
Number of channels |
One |
Monitored functions |
Battery mode |
Switching voltage |
DC 24 V |
Switching current |
DC 1 A |
Isolation voltage |
0.5 kV, 1 min. |
Contact type |
Change over contact |
General |
Derating |
>60 °C: -0.25 A/°C |
Cooling |
Free convection |
Housing material |
Aluminum |
Mounting |
DIN rail mountable TS35 |
(EN 60715) |
Installation position |
Vertical, with 20 mm distance to other devices |
Degree of protection |
IP20 (EN 60529) |
Weight/unit |
0,3 kg |
Connection type |
Connector with screws: 2.5 mm² (AWG 24–12) |
Dimensions (w × h × d) |
54.0 mm × 115.0 mm × 110.0 mm |
PU (units) |
1 |
General ambient conditions |
Operation temperature range |
-40 °C … +70 °C (UL approved up to +60 °C) |
Storage temperature range |
-40 °C … +80 °C |
Over voltage category |
II |
Degree of pollution |
2 (IEC 664-1) |
Relative air humidity |
5 – 95 % RH, non-condensing |
Approvals/Standards |
Certifications |
CE |
UKCA |
cULus (E249179) |
Standards |
UL 508 |
IEC/EN 61010-1 |
IEC/EN 61010-2-201 |
IEC/EN 60950 |
EN 55011 (CISPR11) Class A |
EN 55022 (CISPR22) Class A |
EN 61000-4-2 Level 3 |
EN 61000-4-3 Level 3 |
EN 61000-4-4 Level 3 |
EN 61000-4-5 Level 1 |
EN 61000-4-11 Level 2 |
IEC 60068-2-6 (Vibration sinuosoidal), 5-17.8 Hz: ±1.6 mm, 17.8-500 Hz: 2 g 2 hours / axis (X,Y,Z) |
IEC 60068-2-27 (Shock), 30 g 6 ms, 20 g 11 ms, 3 bumps / direction, 18 bumps total |
Manufacturer | Lutze |
---|---|
Product Lead Time | In Stock |