723110 Lutze Uninterrupted DC power supply Input: DC 24 V, Output: max. DC 10 A

Uninterrupted DC power supply DC UPS for lead batteries Input: DC 24 V, Output: max. DC 10 A Technical Data Input Input voltage DC 26 – 28.5 V Input current DC 3 – 10 A Status display input LED green: PS OK, LED red: Reverse polarity LED green: Battery OK, LED red: Battery low Parameterisation Charging current adjustable by jumper Protection device Input None Energy storage Memory type Chemical (lead based) Nominal battery voltage DC 24 V Max. charging current DC 2 A or DC 4 A Max. battery capacity 75 % @ 26 V, 85 % @ 27 V, 100 % @ 28 V Max. output current 10 Amp Backup time Depends on battery and charging current Fuse for memory medium Vehicle fuse 15 A / 32 V, Mini Type Deep discharge protection 18.5 V ± 0.5 V Output Rated voltage UN DC 24 V Output voltage DC 20 - 28 V Max. output current DC 10 A Status indication Status display output LED yellow: Load OK Monitoring Number of channels One Monitored functions Battery mode Switching voltage DC 24 V Switching current DC 1 A Isolation voltage 0.5 kV, 1 min. Contact type Change over contact General Derating >60 °C: -0.25 A/°C Cooling Free convection Housing material Aluminum Mounting DIN rail mountable TS35 (EN 60715) Installation position Vertical, with 20 mm distance to other devices Degree of protection IP20 (EN 60529) Weight/unit 0,3 kg Connection type Connector with screws: 2.5 mm² (AWG 24–12) Dimensions (w × h × d) 54.0 mm × 115.0 mm × 110.0 mm PU (units) 1 General ambient conditions Operation temperature range -40 °C … +70 °C (UL approved up to +60 °C) Storage temperature range -40 °C … +80 °C Over voltage category II Degree of pollution 2 (IEC 664-1) Relative air humidity 5 – 95 % RH, non-condensing Approvals/Standards Certifications CE UKCA cULus (E249179) Standards UL 508 IEC/EN 61010-1 IEC/EN 61010-2-201 IEC/EN 60950 EN 55011 (CISPR11) Class A EN 55022 (CISPR22) Class A EN 61000-4-2 Level 3 EN 61000-4-3 Level 3 EN 61000-4-4 Level 3 EN 61000-4-5 Level 1 EN 61000-4-11 Level 2 IEC 60068-2-6 (Vibration sinuosoidal), 5-17.8 Hz: ±1.6 mm, 17.8-500 Hz: 2 g 2 hours / axis (X,Y,Z) IEC 60068-2-27 (Shock), 30 g 6 ms, 20 g 11 ms, 3 bumps / direction, 18 bumps total