Wago 750-513 2Do, Ac 250 V 2A Pot-Free Relay2No

Why Choose the WAGO 750-513 Relay Output Module?

The WAGO 750-513 is a reliable 2-channel relay output module designed for the WAGO I/O System 750. It allows PLCs and industrial controllers to switch higher-voltage field devices such as contactors, signalling lamps, motors and relay coils within distributed automation systems.

Each channel provides a potential-free electromechanical relay contact capable of switching loads up to 250 V AC or 30 V DC with a maximum switching current of 2 A. The relay contacts are electrically isolated from the controller electronics, allowing safe and reliable control of external loads. :contentReference

The module integrates seamlessly with WAGO fieldbus couplers and programmable controllers within the modular WAGO 750 distributed I/O architecture. Its compact DIN rail housing and CAGE CLAMP® spring terminal technology allow quick installation and secure wiring inside industrial control cabinets.

Key Advantages

• 2 relay output channels for industrial switching applications.
• Supports AC loads up to 250 V and DC loads up to 30 V.
• Maximum switching current of 2 A per output.
• Potential-free contacts providing electrical isolation.
• Compatible with WAGO 750 Series distributed I/O systems.
• Fast wiring using CAGE CLAMP® spring terminals.

Key Features

• 2 digital relay outputs.
• Contact type: 2 make contacts (normally open).
• Switching voltage: up to 250 V AC / 30 V DC.
• Maximum switching current: 2 A.
• LED indicators show switching status.
• Potential-free relay contacts for safe load switching.
• Compatible with WAGO fieldbus couplers and controllers.

Technical Specifications

• Manufacturer: WAGO
• Series: WAGO I/O System 750
• Model: 750-513
• Module type: Relay output module
• Number of outputs: 2 relay outputs
• Contact configuration: 2 make contacts (NO)
• Switching voltage: up to 250 V AC / 30 V DC
• Maximum switching current: 2 A
• Minimum switching current: approx. 10 mA
• Switching frequency: approx. 0.5 Hz at nominal load
• Isolation: field/system isolation via relay contacts
• System supply voltage: 5 V DC via internal I/O bus
• Connection technology: CAGE CLAMP® spring terminals
• Mounting: 35 mm DIN rail
• Module width: approx. 12 mm
• Operating temperature: 0 °C to +55 °C
• Ingress protection: IP20

Industrial Relay Output Control

Relay output modules provide a reliable interface between PLC control logic and field devices that require higher switching voltages. By using electromechanical relay contacts, these modules safely isolate the controller electronics from external loads.

The WAGO 750-513 allows automation systems to control equipment such as contactors, signal lamps and motors while maintaining electrical isolation between the controller and the field circuit. The relay state is indicated by integrated LEDs for quick status monitoring. :contentReference

Typical Applications

• Switching contactors and relay coils.
• Control of industrial signalling lamps.
• Machine automation and equipment control.
• Building automation and HVAC systems.
• Distributed PLC and remote I/O installations.

Trusted by Automation Engineers

WAGO 750 Series I/O modules are widely used by automation engineers and system integrators to build reliable distributed control systems across manufacturing, infrastructure and process automation industries.