FB01F2P - FUSE HOLDER 2P 10X38

Why Choose the FB01F2P?

The Lovato FB01F2P is a robust 10x38mm fuse holder designed for safe, dependable protection in AC circuits. This 2-pole, 2‑module unit is rated 32A at up to 690VAC and features a frontal IP20 degree for finger-safe operation. Suitable for 10x38mm fuse links, the FB01F2P is IEC/EN compliant and both UL recognised and CSA certified. A clean, no‑indicator design keeps installations simple and clear.

Engineered for reliability, the FB series holder operates from -20 to +70 °C, with storage from -40 to +80 °C and use up to 3000 m altitude. Terminals allow a maximum tightening torque of 2.5 Nm for secure connections. This compact, indicator-free design weighs 132 g and complies with IEC/EN 60269-1/-2, 60947-1/-3, UL 4248-1 and CSA C22.2 n°4248.1.

Key Benefits

• 2-pole protection for 10x38mm fuses in AC applications.
• 32 A rating at up to 690 VAC for robust performance.
• Frontal IP20 finger-safe design enhances operator safety.
• Compact 2-module footprint helps save space in assemblies.
• Wide operating range from -20 to +70 °C.
• IEC/EN compliant, UL recognised and CSA certified.
• Secure terminations with 2.5 Nm maximum terminal torque.
• Indicator-free configuration keeps installations simple and uncluttered.

Technical Specification

• Product type designation: FB
• Operating voltage type: AC
• Operating temperature: -20 to +70 °C
• Storage temperature: -40 to +80 °C
• Max altitude: 3000 m
• Terminal tightening torque (max): 2.5 Nm
• Weight: 132 g
• IP degree (frontal): IP20

What’s Included

• Lovato FB01F2P 10x38mm 2-pole fuse holder (2 modules)
• Manufacturer documentation / installation guidance
• Original manufacturer packaging

Applications

• AC circuits requiring 10x38mm fuse protection up to 690 V
• Equipment needing two-pole fuse isolation at 32 A
• Installations specifying frontal IP20 and indicator-free devices
• Projects requiring IEC/EN, UL, and CSA compliant components
• Upgrades and retrofits of existing 10x38mm fuse circuits

Safety note: Always isolate the supply before installation, use correctly rated 10x38mm fuses, tighten terminals to a maximum of 2.5 Nm, and follow applicable IEC/UL/CSA standards.