SM1RM0016 Lovato magnetic manual motor starter 0.1-0.16 amp

Why Choose the SM1RM0016?

Designed for dependable motor safeguarding, the Lovato SM1RM0016 motor protection circuit breaker delivers high short-circuit performance and precise magnetic trip. With a rated current of 0.16A and an IEC breaking capacity Icu of 100kA at 400V, this unit provides robust protection in demanding panels. A rotary knob ensures straightforward control, while compliance with IEC/EN standards supports reliable integration across industrial control applications.

Engineered for resilience, it features Ui 690 V and Uimp 6 kV, with mechanical life rated at 100000 cycles. Operates from -20 to +60 °C up to 3000 m altitude; terminal tightening torque is 2.5 to 3 Nm and weight is 320 g. Conforms to IEC/EN 60947-1, 60947-2, 60947-4-1, plus UL60947-4-1 and CSA C22.2 n° 60947-4-1.

Key Benefits

• 100kA Icu at 400V for high fault interruption capacity.
• Precise magnetic protection for motor short-circuit events.
• Simple rotary knob control for quick setting and actuation.
• Wide operating temperature range from -20 to +60 °C.
• Long mechanical life rated at 100000 operating cycles.
• High insulation ratings: Ui 690 V and Uimp 6 kV.
• Built to IEC/EN 60947 standards for compliant installations.
• 0.16A rated current for low-current motor protection.

Technical Specification

• Product type designation: SM1RM
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Mechanical life: 100000 cycles
• Terminal tightening torque: 2.5 to 3 Nm
• Operating temperature: -20 to +60 °C
• Storage temperature: -50 to +80 °C
• Max altitude: 3000 m
• Weight: 320 g

What’s Included

• Lovato SM1RM0016 motor protection circuit breaker unit
• Installation and safety information

Applications

• Motor circuits requiring 0.16A protection with magnetic trip
• Panels needing 100kA Icu at 400V short-circuit breaking capacity
• IEC/EN 60947 compliant industrial control assemblies
• Environments from -20 to +60 °C up to 3000 m altitude

Safety note: Installation must be performed by qualified personnel. Isolate power before work and tighten terminals to 2.5–3 Nm, following IEC/EN 60947 guidelines and the manufacturer’s instructions.