P1RC4P63A030 - RES.CURRENT DEV.4P 63A IDN 30MA TYPE A

Why Choose the P1RC4P63A030?

Lovato’s P1RC4P63A030 Residual Current Operated Circuit Breaker combines a 4‑pole, 4‑module format with Type A residual characteristic. Rated current is 63 A with a 30 mA IΔn, aligning with IEC/EN/BS 61008‑1 requirements. This compact unit supports streamlined panel layouts while meeting specification needs for consistent residual current performance in multi‑pole assemblies.

Engineered for demanding environments, the device offers Ui 400 V and Uimp 4 kV, with IP20 frontal protection. It operates from −35 to +70 °C up to 2000 m altitude, and features 1.8–2 Nm terminal tightening torque. With max 3.15 W power dissipation per pole and pollution degree 2, the 326 g unit balances durability and efficient thermal performance.

Key Benefits

• Compact 4‑module, 4‑pole design for streamlined panel assemblies.
• Type A residual characteristic to match specified application requirements.
• Rated 63 A with 30 mA IΔn for defined sensitivity.
• Ui 400 V and Uimp 4 kV for robust insulation performance.
• Operates −35 to +70 °C; suitable up to 2000 m altitude.
• IP20 frontal protection and pollution degree 2 for panel integration.
• IEC/EN/BS 61008-1 conformity for standards-aligned specification and selection.
• Low 3.15 W per pole power dissipation aids thermal management.

Technical Specification

• Rated insulation voltage Ui (IEC/EN): 400 V
• Rated impulse withstand voltage Uimp: 4 kV
• Power dissipation per pole (max): 3.15 W
• Operating temperature: -35 to +70 °C
• Storage temperature: -40 to 80 °C
• Max altitude: 2000 m
• Terminal tightening torque: 1.8 to 2 Nm
• Weight: 326 g
• IP degree (frontal): IP20
• Pollution degree: 2

What’s Included

• Residual current operated circuit breaker P1RC4P63A030
• Installation and safety instructions
• Protective packaging for transit
• Manufacturer datasheet reference

Applications

• 4‑pole assemblies requiring Type A residual characteristic
• Panels specified at 63 A with 30 mA residual current
• Installations conforming to IEC/EN/BS 61008-1
• Enclosures with IP20 frontal interface and pollution degree 2
• Systems designed for Ui 400 V insulation levels

Safety note: Install and commission by qualified personnel only. Observe IEC/EN/BS 61008-1, tighten terminals to 1.8–2 Nm, and operate strictly within the stated electrical and environmental limits.