P1RC2P63AC030 - RES.CURRENT DEV.2P 63A IDN 30MA TYPE AC

Why Choose the P1RC2P63AC030?

Engineered by Lovato, the P1RC2P63AC030 residual current operated circuit breaker delivers dependable AC residual protection in compact form. This 2-module, 2P device is rated 63 A with a 30 mA I∆n for sensitive fault protection. With a rated insulation voltage Ui of 400 V and 4 kV impulse withstand, it integrates easily into DIN rail assemblies while meeting IEC/EN/BS 61008-1 requirements.

Built for reliability, this RCCB offers IP20 frontal protection, robust terminals with 1.8–2 Nm tightening torque, and low 3.78 W max power dissipation per pole. It operates from -35 to +70 °C, stores from -40 to 80 °C, and is suitable up to 2000 m altitude (pollution degree 2). Compact 185 g construction streamlines panel design without compromising performance.

Key Benefits

• Type AC residual protection with 30 mA sensitivity for fault detection.
• 63 A, two-pole configuration for robust circuit isolation.
• Compact 2-module width saves DIN rail and panel space.
• 400 V Ui and 4 kV Uimp enhance insulation reliability.
• Wide -35 to +70 °C operating range suits demanding environments.
• IP20 frontal degree for basic ingress protection.
• Standards compliance to IEC/EN/BS 61008-1 for assured conformity.
• Defined terminal tightening torque 1.8–2 Nm ensures secure connections.

Technical Specification

• Rated insulation voltage Ui (IEC/EN): 400 V
• Rated impulse withstand voltage Uimp: 4 kV
• Power dissipation per pole (max): 3.78 W
• Operating temperature: -35 to +70 °C
• Storage temperature: -40 to 80 °C
• Max altitude: 2000 m
• Terminal tightening torque: 1.8 to 2 Nm
• Weight: 185 g
• IP degree (frontal): IP20
• Pollution degree: 2

What’s Included

• Residual current operated circuit breaker (2P, 63 A, 30 mA)
• Installation and safety information
• Manufacturer datasheet (online access)
• Protective packaging

Applications

• AC circuits requiring 30 mA residual protection at up to 63 A
• Two-pole protection in DIN rail distribution and control panels
• Installations designed to IEC/EN/BS 61008-1 requirements
• Environments within -35 to +70 °C and up to 2000 m altitude

Safety note: Install and commission only by a qualified electrician. Isolate power before work, follow IEC/EN/BS 61008-1 and the manufacturer’s instructions, and adhere to all stated ratings and torque values.