We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
P1RC2P63A030 - RES.CURRENT DEV.2P 63A IDN 30MA TYPE A
MPN: P1RC2P63A030
Why Choose the P1RC2P63A030?
Lovato’s P1RC2P63A030 is a residual current operated circuit breaker designed for dependable residual current protection in compact assemblies. This 2‑module, 2P Type A device is rated 63 A with 30 mA sensitivity, conforming to IEC/EN/BS 61008-1. With Ui 400 V and 4 kV impulse withstand, it fits DIN rail installations where reliable residual current protection and straightforward coordination are essential.
Engineered for demanding environments, it operates from -35 to +70 °C, stores at -40 to 80 °C, and is suitable up to 2000 m altitude. A frontal IP20 rating, pollution degree 2, and terminals tightened to 1.8–2 Nm support safe installation. Power dissipation is 3.78 W per pole and the unit weighs 185 g, streamlining panel design.
Key Benefits
- Type A residual characteristic compliant with IEC/EN/BS 61008-1.
- 63 A rated current with 30 mA residual operating current.
- Compact 2 DIN modules and 2P design saves panel space.
- Rated insulation voltage 400 V and 4 kV impulse withstand.
- Wide operating temperature range from -35 to +70 °C.
- Frontal IP20 degree and pollution degree 2 for safety.
- Terminal tightening torque 1.8 to 2 Nm aids reliable connections.
- Max altitude 2000 m supports varied installation sites.
Technical Specification
- Rated insulation voltage Ui (IEC/EN): 400 V
- Rated impulse withstand voltage Uimp: 4 kV
- Power dissipation per pole (max): 3.78 W
- Operating temperature: -35 to +70 °C
- Storage temperature: -40 to 80 °C
- Max altitude: 2000 m
- Terminal tightening torque: 1.8 to 2 Nm
- Weight: 185 g
- IP degree (frontal): IP20
- Pollution degree: 2
What’s Included
- Lovato residual current operated circuit breaker (SKU P1RC2P63A030)
- Installation and safety instructions
- Manufacturer datasheet
Applications
- DIN rail distribution boards requiring residual current protection
- Two‑pole circuits rated up to 63 A
- Control panels adhering to IEC/EN/BS 61008-1 standards
- Environments within -35 to +70 °C and up to 2000 m altitude
Frequently Asked Questions
What are the rated current and residual current settings?
It is rated at 63 A with a 30 mA rated residual current.
What residual operation characteristic does this breaker have?
It has a Type A residual operation characteristic as per IEC/EN/BS 61008-1.
How much space does it take in the enclosure?
It occupies 2 DIN modules and is a 2‑pole device.
What are the voltage ratings?
Rated insulation voltage Ui is 400 V and impulse withstand Uimp is 4 kV.
What environmental and installation limits apply?
It operates from -35 to +70 °C, has a frontal IP20 rating, is suitable to 2000 m altitude, and terminals tighten to 1.8–2 Nm.
Safety note: Install and commission only by qualified personnel. Always isolate power before work and follow the manufacturer’s instructions and IEC/EN/BS 61008-1 requirements.
| Manufacturer Part Number | P1RC2P63A030 |
|---|---|
| Manufacturer | Lovato |
| Barcode | 8013975204764 |
Write Your Own Review
