P1RC2P25AC300 - RES.CURRENT DEV.2P 25A IDN 300MA TYPE AC

Why Choose the P1RC2P25AC300?

Lovato’s residual current operated circuit breaker delivers dependable residual-current protection in a compact, modular format. This 2P, 2-module Type AC device is rated 25 A with a 300 mA I∆n, making it suitable for general AC applications. Designed to IEC standards and built for panel integration, it offers 400 V Ui and 4 kV Uimp performance in an IP20 frontal enclosure. SKU P1RC2P25AC300.

Engineered for real-world conditions, it operates from -35 to +70 °C and up to 2000 m altitude, with 1.8–2 Nm terminal tightening torque for secure connections. Conforming to IEC/EN/BS 61008-1 and marked for sustainability, the 185 g unit’s AC residual characteristic and two-pole configuration support straightforward integration across boards where a 300 mA trip level and 25 A rating are specified.

Key Benefits

• Compact 2-module width saves DIN rail space in panels.
• Two-pole construction enables simultaneous switching of both conductors.
• Type AC residual characteristic for general-purpose AC installations.
• 25 A rating with 300 mA I∆n for defined protection thresholds.
• Conforms to IEC/EN/BS 61008-1 for regulatory compliance.
• Wide -35 to +70 °C operating range for varied environments.
• IP20 frontal degree with 4 kV impulse withstand capability.
• 1.8–2 Nm terminal torque supports secure terminations.

Technical Specification

• Rated insulation voltage Ui (IEC/EN): 400 V
• Rated impulse withstand voltage Uimp: 4 kV
• Power dissipation per pole (max): 0.5 W
• Operating temperature: -35 to +70 °C
• Storage temperature: -40 to 80 °C
• Max altitude: 2000 m
• Terminal tightening torque: 1.8 to 2 Nm
• Weight: 185 g
• IP degree (frontal): IP20
• Pollution degree: 2

What’s Included

• Lovato residual current operated circuit breaker, 2P, 2 modules (SKU P1RC2P25AC300)
• Installation leaflet
• Manufacturer packaging

Applications

• AC circuits requiring Type AC residual current protection at 300 mA
• Panels needing a 2P, 2-module RCCB form factor
• Installations built to IEC/EN/BS 61008-1 compliance requirements
• Environments operating between -35 and +70 °C, up to 2000 m altitude

Safety note: Install and commission only by a qualified electrician. Isolate the supply before work and ensure conformity with IEC/EN/BS 61008-1 and local regulations.