P1RC2P25AC030 - RES.CURRENT DEV.2P 25A IDN 30MA TYPE AC

Why Choose the P1RC2P25AC030?

Lovato’s P1RC2P25AC030 residual current operated circuit breaker delivers dependable AC residual protection for two-pole circuits. This 2-module RCCB is rated 25A with 30 mA sensitivity for additional personnel protection, and complies with IEC/EN/BS 61008-1. With a rated insulation voltage Ui of 400 V and 4 kV impulse withstand, it supports robust installation in distribution boards where earth leakage detection is essential.

Engineered for demanding environments, it operates from -35 to +70 °C and is rated IP20 at the front. The device occupies two DIN modules, features secure terminals tightened to 1.8–2 Nm, and withstands altitudes up to 2000 m. With 0.5 W max power dissipation per pole, pollution degree 2, and a 185 g build, it offers reliable, efficient protection.

Key Benefits

• Two-pole Type AC residual protection for general sinusoidal AC fault currents.
• 25A rated current with 30 mA sensitivity for additional personnel protection.
• Compact format occupying 2 DIN modules to save board space.
• Robust insulation: Ui 400 V and 4 kV impulse withstand.
• Front IP20 protection for safer handling within enclosures.
• Wide operating temperature range from -35 to +70 °C.
• Secure terminations with 1.8–2 Nm tightening torque specification.

Technical Specification

• Rated insulation voltage Ui (IEC/EN): 400 V
• Rated impulse withstand voltage Uimp: 4 kV
• Power dissipation per pole (max): 0.5 W
• Operating temperature: -35 to +70 °C
• Storage temperature: -40 to 80 °C
• Max altitude: 2000 m
• Terminal tightening torque: 1.8 to 2 Nm
• Weight: 185 g
• IP degree (frontal): IP20
• Pollution degree: 2

What’s Included

• Lovato residual current operated circuit breaker P1RC2P25AC030
• Installation leaflet and safety information
• Protective packaging for transit
• Compliance markings as per IEC/EN/BS 61008-1

Applications

• Distribution boards requiring AC residual current protection
• Lighting and socket circuits needing 30 mA additional protection
• Commercial and residential sub-circuits with two-pole isolation
• Control panels and enclosures with 2 DIN-module space
• Retrofit upgrades to meet IEC/EN/BS 61008-1 requirements

Safety note: Always isolate the supply before installation or maintenance and have the device fitted by a qualified electrician, following the manufacturer’s instructions and the stated environmental and torque specifications.