P1RB1NC10A030 - RCBO 1P+N CURVE C 10A IDN 30MA TYPE A

Why Choose the P1RB1NC10A030?

Lovato’s P1RB1NC10A030 is a residual current circuit breaker with overcurrent protection designed for reliable fault protection. This 2‑module, 1P+N device combines 10kA rating, 10A In, C tripping curve and Type A residual characteristic with 30 mA IΔn to safeguard circuits. Built to IEC/EN 61009‑1, it delivers dependable performance where residual and overcurrent protection must be combined in a single, space‑saving unit.

Engineered for demanding conditions, it offers Ui 400 V and Uimp 4 kV, with IP20 frontal protection. Operating temperature spans −35 to 70 °C (storage −40 to 80 °C), with installation up to 2000 m altitude. Terminals tighten to 1.8–2 Nm, while power dissipation is 1.7 W per pole. The unit weighs 205 g and is rated Pollution degree 2.

Key Benefits

• Residual and overcurrent protection in a compact 2‑module footprint.
• 10kA rated device for robust fault handling.
• Type A, 30 mA residual sensitivity for dependable circuit protection.
• C tripping curve and 10A rated current for consistent operation.
• Rated insulation voltage 400 V; impulse withstand voltage 4 kV.
• IP20 frontal protection with Pollution degree 2 construction.
• Wide operating range −35 to 70 °C; torque 1.8–2 Nm.

Technical Specification

• Rated insulation voltage Ui (IEC/EN): 400 V
• Rated impulse withstand voltage Uimp: 4 kV
• Power dissipation per pole (max): 1.7 W
• Operating temperature: -35 to 70 °C
• Storage temperature: -40 to 80 °C
• Max altitude: 2000 m
• Terminal tightening torque: 1.8 to 2 Nm
• Weight: 205 g
• IP degree (frontal): IP20
• Pollution degree: 2

What’s Included

• Lovato residual current circuit breaker with overcurrent protection
• Manufacturer datasheet and product documentation
• Standard packaging for transport and storage

Applications

• Circuits requiring combined residual and overcurrent protection in a single device.
• Installations needing 1P+N, 10A, Type A, 30 mA protection.
• Panels specifying 2 DIN‑module devices with C tripping curve.
• Projects requiring IEC/EN 61009‑1 conformity and IP20 frontal protection.
• Environments within −35 to 70 °C and up to 2000 m altitude.

Safety note: Install and commission only by qualified personnel. Isolate the supply before work, tighten terminals to the specified torque, and follow IEC/EN 61009-1 and local regulations.