M2P03212024B4 - DOL STARTER M2P 24/50-60 24-32A

Why Choose the M2P03212024B4?

Designed for reliable motor control, the Lovato Direct-on-line-starter M2P03212024B4 delivers 24...32A performance for motors up to 15 kW at 400 V (AC-3). Housed in a non-metallic IP65 enclosure, it includes a thermal overload relay and clearly labelled START and STOP/RESET pushbuttons. The 24VAC 50/60Hz AC coil integrates cleanly into common control circuits, streamlining installation and commissioning.

Built to recognised standards, it conforms to IEC/EN 60947-1, IEC/EN 60947-4-1, and UL508 CSA C22.2 n° 14. Operating from -25 to +60 °C and storable at -40 to +70 °C, it also carries a 20 HP rating at 480 V (UL/CSA). Weighing 1300 g, it balances durability with practical handling for efficient installation.

Key Benefits

• 24...32A range supports motors up to 15 kW at 400 V AC-3.
• Integrated thermal overload relay provides dependable motor protection.
• IP65 non-metallic enclosure enhances durability in demanding environments.
• 24VAC 50/60Hz AC coil suits common industrial control supplies.
• Start and Stop/Reset buttons enable safe, intuitive local operation.
• Conforms to IEC/EN 60947 series and UL508 CSA C22.2 n° 14.
• Wide operating temperature range from -25 to +60 °C.

Technical Specification

• Weight: 1300 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Lovato DOL starter M2P03212024B4 (enclosed with thermal overload relay)
• Non-metallic IP65 enclosure with pre-fitted START and STOP/RESET buttons
• Contactor with 24VAC 50/60Hz coil
• Product datasheet (downloadable)

Applications

• Direct starting of three-phase motors up to 15 kW at 400 V
• Local on/off motor control with Stop/Reset for overload trips
• Industrial machinery, conveyors, and materials handling equipment
• Pumps and fans requiring straightforward, reliable DOL starting

Safety note: Installation and commissioning should be performed by qualified personnel. Isolate the supply, set the overload correctly for the motor, and observe the stated temperature limits.