M2P02512230B3 - DOL STARTER M2P 230/50-60 20-25A

Why Choose the M2P02512230B3?

Lovato’s M2P02512230B3 direct-on-line starter delivers dependable motor starting in a compact, non-metallic IP65 enclosure. Rated 20–25A (11kW at 400V), it incorporates a 230VAC 50/60Hz AC coil and an integrated thermal overload relay for motor protection. Front-mounted START and STOP/RESET pushbuttons provide straightforward control, making installation and operation simple across industrial environments requiring robust protection and clear operator interfaces.

Built to recognised standards, it conforms to IEC/EN 60947-1 and IEC/EN 60947-4-1, with UL508 and CSA C22.2 n° 14 references. Operating from -25 to +60 °C, the sealed non-metallic housing offers IP65 ingress protection. With practical Start-Stop/Reset functionality and a fitted thermal overload relay, it streamlines commissioning and helps deliver consistent, safe motor control.

Key Benefits

• IP65 non-metallic enclosure for dust-tight and water-jet resistant protection.
• Integrated thermal overload relay for dependable motor overload protection.
• 230VAC 50/60Hz AC coil simplifies control wiring and supply matching.
• 20–25A rating supports motors up to 11kW at 400V.
• Start and Stop/Reset pushbuttons enable immediate on-panel operation.
• Conforms to IEC/EN 60947 standards, with UL/CSA references for compliance.
• Wide operating temperature range -25 to +60 °C for reliability.

Technical Specification

• Weight: 1220 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Enclosed direct-on-line starter with fitted thermal overload relay
• IP65 non-metallic enclosure with pre-installed Start and Stop/Reset buttons
• Contactor with 230VAC 50/60Hz coil
• Product datasheet or installation guidance

Applications

• Across-the-line starting of motors up to 11kW at 400V
• Pumps, fans and conveyors requiring on-panel Start/Stop control
• Industrial environments needing IP65 dust and water ingress protection
• General machinery where a compact enclosed DOL starter is preferred

Safety note: Installation and commissioning should be carried out by a qualified electrician. Isolate the supply before work, set the thermal overload correctly for the motor, and follow applicable standards and instructions.