M1R00912400B0 - DOL STARTER M1R 400/50-60 9-14A

Why Choose the M1R00912400B0?

Engineered for dependable motor starting, the Lovato direct-on-line starter M1R00912400B0 comes enclosed with a thermal overload relay and a convenient RESET pushbutton. Built around the BF09/BF18 contactor, it features a 400VAC 50/60Hz AC coil and an IP65 enclosure for tough environments. This compact, ready-to-install unit streamlines across-the-line starting while safeguarding motors and simplifying maintenance.

Delivering up to 18A (7.5kW at 400V) with an IEC AC-3 rating of 13A/5.5kW, this direct-on-line starter suits a wide range of small and medium motors. It carries UL/CSA 5 HP at 480V, operates from −25 to +60 °C, and is tested to IEC/EN 60947-1, IEC/EN 60947-4-1 and UL508 CSA C22.2 n° 14, with sustainability certification.

Key Benefits

• IP65 enclosure resists dust and water for reliable field use.
• Integrated thermal overload relay protects motors from overcurrent.
• RESET pushbutton enables quick, safe manual recovery after trips.
• 400VAC 50/60Hz AC coil matches common three-phase control supplies.
• Up to 18A, 7.5kW at 400V for versatile motor starting.
• IEC/EN and UL/CSA compliant for global installation confidence.
• Wide −25 to +60 °C operating range supports harsh environments.

Technical Specification

• Weight: 995 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Enclosed direct-on-line starter with thermal overload relay
• Built-in RESET pushbutton and BF09/BF18 contactor assembly
• Installation and safety instructions
• Mounting hardware (standard fixings)

Applications

• Across-the-line starting of three-phase motors up to 7.5kW at 400V
• Pumps, fans and conveyors requiring simple, reliable motor control
• Industrial panels needing IP65 enclosed DOL starters
• General machinery complying with IEC/EN 60947 and UL508 standards

Safety note: Install and commission only by a qualified electrician. Isolate all power before wiring or resetting, and set the thermal overload to the motor’s rated current in accordance with applicable standards.