M1R00912230B0 - DOL STARTER M1R 230/50-60 9-14A

Why Choose the M1R00912230B0?

The Lovato M1R00912230B0 Direct-on-line-starter delivers reliable motor starting in a robust IP65 enclosure. Supplied enclosed with a thermal overload relay and a handy RESET pushbutton, it uses a BF09/BF18 contactor with a 400VAC 50/60Hz AC coil for dependable switching. Rated AC-3 13A/5.5kW at 400V, it also carries a UL/CSA 5 HP rating at 480V for broad compliance in industrial applications.

With a thermal overload relay rated to 1.6A max (0.37...0.55kW at 400V), this enclosed starter protects your motor while simplifying installation. Built to perform from -25 to +60 °C and weighing 995 g, it conforms to IEC/EN 60947-1, IEC/EN 60947-4-1 and UL508 CSA C22.2 n° 14, supporting dependable, standards-compliant performance across demanding environments.

Key Benefits

• IP65 enclosed housing protects against dust and water ingress.
• Integrated thermal overload relay rated to 1.6A max.
• AC-3 13A/5.5kW at 400V for dependable motor starting.
• UL/CSA 5 HP at 480V rating for compliance.
• 400VAC 50/60Hz AC coil with BF09/BF18 contactor.
• Reset pushbutton for quick fault recovery.
• Wide operating temperature range -25 to +60 °C.

Technical Specification

• Weight: 995 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Enclosed Direct-on-line-starter with thermal overload relay
• Integrated BF09/BF18 contactor with 400VAC 50/60Hz coil
• Built-in RESET pushbutton
• Product documentation

Applications

• AC-3 motor loads up to 5.5kW at 400V
• Installations requiring IP65 enclosed motor starters
• Control panels using 400VAC 50/60Hz coils
• Systems compliant with IEC/EN 60947 and UL508 standards

Safety note: Install and commission by qualified personnel only. Isolate power before work and set the thermal overload to the motor’s rated current according to applicable standards and local regulations.