M1R00912230A7 - DOL STARTER M1R 230/50-60 2 5-4A

Why Choose the M1R00912230A7?

Built for reliable motor control, the Lovato M1R00912230A7 direct-on-line starter combines an enclosed IP65 design with an integrated thermal overload relay and RESET pushbutton. Featuring a BF09/BF18 contactor and a 230VAC 50/60Hz AC coil, it delivers straightforward starting and protection for small motors, with ratings including 4A/1.5kW (AC-3 at 400V) and up to 10A, 3…4kW at 400V.

Engineered to industry standards IEC/EN 60947-1 and 60947-4-1, and recognised under UL508/CSA C22.2 n° 14, this Lovato direct-on-line starter suits demanding environments from -25 to +60 °C. Weighing 995 g with a robust enclosure, it offers dependable performance and a practical RESET function, supported by a 2 HP rating at 480V (UL/CSA) and Lovato’s sustainability certification.

Key Benefits

• IP65 enclosed design helps protect against dust and moisture.
• Integrated thermal overload relay for motor protection and uptime.
• 230VAC 50/60Hz AC coil fits common 230VAC control circuits.
• RESET pushbutton enables quick manual recovery after trips.
• Complies with IEC/EN 60947 and UL508 CSA C22.2 n° 14.
• Rated 4A/1.5kW AC-3 at 400V; UL 2 HP at 480V.
• Wide operating temperature range from -25 to +60 °C.

Technical Specification

• Weight: 995 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Enclosed direct-on-line starter with thermal overload relay (IP65)
• BF09/BF18 contactor fitted with 230VAC 50/60Hz coil
• Integrated RESET pushbutton on enclosure
• Installation and safety information

Applications

• Starting small motors at 400V within stated ratings
• Pump, fan and conveyor drives requiring direct-on-line starting
• Industrial machinery needing simple motor control and overload protection
• Sites requiring IP65 enclosed motor starters
• Installations needing 230VAC coil control at 50/60Hz

Safety note: Install, commission and maintain only by qualified personnel. Isolate all power before work, verify correct overload settings to the motor nameplate, and follow applicable standards and local regulations.