M1P0181012060 - DOL STARTER M1P 120/60 18A W/O RELAY

Why Choose the M1P0181012060?

The Lovato M1P0181012060 direct-on-line starter is an enclosed unit without a thermal overload relay, designed for straightforward motor control. It features integrated START and STOP/RESET pushbuttons and a BF09/BF18 contactor. Rated IP65 and 18A max (≤440V), it uses a 120VAC 60Hz AC coil. UL/CSA horsepower rating is 10 HP at 480V, and it conforms to IEC/EN 60947-1, IEC/EN 60947-4-1 and UL508 CSA C22.2 n° 14.

Product type designation M1P01810, with an operating temperature of -25 to +60 °C and storage from -40 to +70 °C, the unit suits varied environments. The IP65 enclosure supports use in dusty or damp areas, while the absence of an overload relay allows selection of external protection to match the motor. Weight is 910 g, and the product carries a Sustainability certification.

Key Benefits

• Enclosed design without thermal overload relay for flexible external protection choices.
• IP65 enclosure for reliable operation in dusty or damp locations.
• Integrated START and STOP/RESET buttons for simple local control.
• 18A max (≤440V) rating supports robust direct-on-line starting.
• 120VAC 60Hz AC coil for straightforward control circuit compatibility.
• UL/CSA 10 HP at 480V rating for assured performance.
• Conforms to IEC/EN 60947 and UL508 CSA standards.

Technical Specification

• Product type designation: M1P01810
• Weight: 910 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Enclosed direct-on-line starter assembly with BF09/BF18 contactor
• Integrated START and STOP/RESET pushbuttons
• Basic installation and safety information
• Product datasheet (downloadable)

Applications

• Across-the-line starting of AC motors within stated current and voltage ratings
• Industrial machinery and equipment control panels
• Pumps, fans and conveyors where IP65 enclosure adds protection
• General-purpose motor starters in dusty or damp plant areas

Safety note: Install and commission only by qualified personnel. Isolate power before work, provide appropriate short-circuit and overload protection, and operate within the stated voltage, current and environmental ratings.