M1P00912400B0 - DOL STARTER M1P 400/50-60 9-14A

Why Choose the M1P00912400B0?

Optimise straightforward motor starting with the Lovato Direct-on-line Starter M1P00912400B0. Covering a 9–14A range and rated 5.5kW at 400V (AC3), it features a non‑metallic IP65 enclosure, integrated thermal overload relay, and START plus STOP/RESET pushbuttons. A 400VAC 50/60Hz AC coil drives the contactor for dependable operation, delivering simple Start/Stop control and overload protection in one compact, enclosed unit.

Designed for reliability and compliance, this enclosed direct-on-line starter meets IEC/EN 60947-1 and 60947-4-1, and is recognised under UL508 and CSA C22.2 n° 14 with a 5 HP rating at 480V. It operates from −25 to +60 °C and carries a Sustainability certification. Choose it when you require direct-on-line starting, clear Start/Stop control, and integrated thermal overload protection in a robust enclosed build.

Key Benefits

• IP65 non‑metallic enclosure resists dust and water ingress.
• 9–14A range, 5.5kW at 400V for AC3 motor loads.
• Integrated thermal overload relay for built‑in motor protection.
• 400VAC 50/60Hz AC coil for reliable contactor operation.
• Start and STOP/RESET buttons for clear local control.
• UL/CSA 5 HP at 480V and IEC/EN conformity.
• Operating temperature −25 to +60 °C for versatility.
• Compact enclosed design with contactor and protection integrated.

Technical Specification

• Weight: 1040 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Direct-on-line starter assembly with thermal overload relay
• Non-metallic IP65 enclosure with START and STOP/RESET buttons
• Contactor with 400VAC 50/60Hz AC coil
• Basic installation and operation instructions

Applications

• Direct-on-line starting of AC3 motors up to 5.5kW at 400V
• Installations requiring IP65 enclosed motor control with local Start/Stop
• UL/CSA 5 HP at 480V motor applications
• Sites operating between −25 and +60 °C with non‑metallic enclosure needs

Safety note: Install and commission only by qualified personnel. Set the overload within the 9–14A range to match motor full-load current and isolate power before servicing.