M1P00912024A7 - DOL STARTER M1P 024/50-60 2 5-4A

Why Choose the M1P00912024A7?

Lovato’s M1P00912024A7 direct-on-line starter offers dependable motor starting and protection in a compact, enclosed design. Covering 2.5…4A (1.1…1.5kW at 400V) with an integrated thermal overload relay, it suits fixed-speed applications. The IP65 non‑metallic enclosure withstands challenging environments, while a 24VAC 50/60Hz coil simplifies control wiring. Front START and STOP/RESET pushbuttons provide straightforward local control.

Designed for compliance and reliability, this Direct-on-line-starter meets IEC/EN 60947-1 and IEC/EN 60947-4-1, plus UL508 and CSA C22.2 n° 14. It is rated 2 HP at 480V for UL/CSA applications and operates from −25 to +60 °C, with storage down to −40 °C. At 1040 g, it integrates neatly into control panels, supporting efficient commissioning and maintenance.

Key Benefits

• Simple direct-on-line starting with integrated thermal overload protection.
• Covers 2.5…4 A for dependable motor protection within stated range.
• Suits 1.1–1.5 kW motors at 400 V, AC-3 4 A.
• IP65 non-metallic enclosure resists dust and low-pressure water jets.
• 24 VAC 50/60 Hz coil eases integration into common control circuits.
• Front START and STOP/RESET pushbuttons enable clear, local operation.
• Conforms to IEC/EN 60947 series and UL/CSA standards for assurance.

Technical Specification

• Weight: 1040 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Direct-on-line starter assembly with integrated thermal overload relay (2.5…4A)
• IP65 non-metallic enclosure with START and STOP/RESET pushbuttons
• 24VAC 50/60Hz contactor coil
• Product datasheet and basic installation information

Applications

• Fixed-speed motor starting in industrial control panels
• Pumps, fans and conveyors up to 1.5 kW at 400 V
• General machinery requiring simple on/off motor control
• OEM equipment needing compact, enclosed direct-on-line starters

Safety note: Install and commission only by qualified personnel. Isolate all power sources before wiring or maintenance and follow applicable standards and manufacturer instructions.