M1P00910110 - DOL STARTER M1P 110/50-60 14A W/O RELAY

Why Choose the M1P00910110?

Lovato’s M1P00910110 is an enclosed Direct-on-line starter designed for reliable motor control without a built-in thermal overload relay. It features Start and Stop/Reset pushbuttons and a BF09/BF18 contactor driven by a 110VAC 50/60Hz AC coil. Rated up to 13A at ≤440V with an IP65 enclosure, it suits demanding industrial control environments where straightforward, direct starting is required.

Backed by IEC/EN 60947-1 and 60947-4-1, plus UL508 and CSA C22.2 n° 14 conformity, this unit delivers dependable performance across -25 to +60 °C. The UL/CSA horsepower rating is 5 HP at 480V. Product type designation M1P00910, weight 910 g. Choose this Lovato Direct-on-line starter for a robust enclosed assembly that integrates cleanly into panels using a 110VAC control supply.

Key Benefits

• Enclosed design without thermal overload relay for flexible external protection selection.
• Start and Stop/Reset buttons enable simple local control and reset.
• 110VAC 50/60Hz AC coil suits common control supplies.
• IP65 rating supports use in demanding industrial environments.
• Rated up to 13A at ≤440V for suitable motor circuits.
• UL/CSA 5HP at 480V aids North American compliance and sizing.
• Conformity to IEC/EN 60947-1 and 60947-4-1 for assured reliability.
• Wide operating temperature -25 to +60 °C supports varied installations.

Technical Specification

• Product type designation: M1P00910
• Weight: 910 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Lovato M1P00910110 enclosed Direct-on-line starter assembly
• Integrated BF09/BF18 contactor with 110VAC 50/60Hz AC coil
• Start and Stop/Reset pushbuttons on IP65 enclosure
• Basic product documentation

Applications

• Direct starting of suitable AC motors up to 13A (≤440V)
• Control circuits using a 110VAC 50/60Hz coil supply
• Panels requiring IP65 enclosed DOL starters
• Installations referencing UL/CSA 5HP at 480V ratings

Safety note: Installation must be performed by qualified personnel. Provide appropriate external overload protection, verify the 110VAC coil supply, and observe the stated current, voltage and temperature limits.