M0R009124001 - DOL STARTER M0R 400/50-60 0 6-1A

Why Choose the M0R009124001?

Designed for dependable motor starting, the Lovato M0R009124001 direct-on-line starter combines an enclosed IP65 housing with a thermal overload relay and a convenient RESET pushbutton. Supplied with a BG09/BG12 contactor and an AC control coil rated 400VAC 50/60Hz, it provides a compact, ready-to-use solution for on/off control where protection against dust and water ingress is essential.

Performance is assured with IEC AC-3 ratings of 1A/0.25kW at 400V and UL/CSA horsepower of 0.5HP at 480V, backed by compliance to IEC/EN 60947-1, IEC/EN 60947-4-1 and UL508 CSA C22.2 n° 14. With an operating temperature range of -25 to +60 °C and Sustainability certification, this Lovato direct-on-line starter fits demanding industrial control specifications.

Key Benefits

• IP65 enclosed design for reliable protection in demanding environments.
• Integrated thermal overload relay with front RESET pushbutton.
• Rated 1A / 0.25kW at 400V (IEC AC-3).
• 400VAC 50/60Hz AC coil for consistent control performance.
• UL/CSA 0.5 HP at 480V for international compliance.
• Operates from -25 to +60 °C to suit varied sites.
• Conforms to IEC/EN 60947-1 and 60947-4-1 standards.
• Supplied with BG09/BG12 contactor for dependable switching.

Technical Specification

• Weight: 720 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Enclosed direct-on-line starter with thermal overload relay (pre-assembled)
• Integrated BG09/BG12 contactor
• RESET pushbutton on enclosure
• Documentation (datasheet/installation guide)

Applications

• Small AC motor starting up to 0.25kW at 400V
• Industrial control panels requiring IP65 enclosed starters
• Equipment needing manual reset after overload trip
• UL/CSA installations up to 0.5 HP at 480V
• General-purpose on/off control in harsh or dusty areas

Safety note: Installation and commissioning must be carried out by a qualified electrician. Always isolate the supply before work, and set the overload protection to match the motor’s nameplate ratings in accordance with applicable standards.