M0R0091223010 - DOL STARTER M0R 230/50-60 6-10A

Why Choose the M0R0091223010?

Designed for dependable motor control, the Lovato Direct-on-Line Starter M0R0091223010 combines an enclosed build with an integrated thermal overload relay for robust protection. Featuring a front RESET pushbutton and a BG09/BG12 contactor, it delivers straightforward operation and serviceability. Rated 10A/4kW at 400V (AC-3) with an IP65 enclosure and an AC coil powered at 230VAC 50/60Hz, it fits common industrial control schemes.

Built to recognised standards, this direct-on-line starter conforms to IEC/EN 60947-1 and 60947-4-1, plus UL508 and CSA C22.2 n° 14. It supports 5HP at 480V under UL/CSA ratings. With a 720 g weight and operating temperature from -25 to +60 °C, it suits demanding environments, while storage to -40 to +70 °C and a Sustainability certification support responsible, long-lasting deployment.

Key Benefits

• Reliable DOL starting up to 10A/4kW at 400V (AC-3).
• IP65 enclosed design resists dust and water ingress.
• Integrated thermal overload relay safeguards the motor.
• Front RESET pushbutton speeds fault recovery and reset.
• 230VAC 50/60Hz AC coil suits common control supplies.
• Fitted with BG09/BG12 contactor for dependable operation.
• Conforms to IEC/EN 60947 and UL/CSA standards.
• Wide operating temperature range from -25 to +60 °C.

Technical Specification

• Weight: 720 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Direct-on-line starter assembly with BG09/BG12 contactor
• Integrated thermal overload relay
• Enclosure with front RESET pushbutton
• Basic user documentation

Applications

• Direct-on-line starting of motors up to 4kW at 400V
• Installations using 230VAC control circuits for motor starters
• Industrial settings requiring IP65 enclosed motor control gear
• Projects needing IEC/EN and UL/CSA compliant motor protection
• General-purpose machinery where thermal overload protection is required

Safety note: Install and commission only by qualified personnel. Isolate power before work, set the thermal overload relay to the motor's rated current, and follow applicable IEC/EN and UL/CSA requirements.