M0P0121223015 - DOL STARTER M0P 230/50-60 9-15A

Why Choose the M0P0121223015?

Lovato M0P0121223015 is a compact direct-on-line starter designed for reliable motor control. Rated 9...12A with 5.5kW at 400V, it features an IP65 non‑metallic enclosure for robust protection. This enclosed unit integrates a thermal overload relay and clearly marked START and STOP/RESET pushbuttons, with a 230VAC 50/60Hz contactor coil to suit common control voltages. Ideal where straightforward, compliant starting is required.

Built to recognised standards including IEC/EN 60947-1 and 60947-4-1, plus UL508 and CSA C22.2 n° 14, this Lovato direct-on-line starter supports up to 10 HP at 480V (UL/CSA). Operating from −25 to +60 °C and weighing 760 g, it offers dependable performance and a compact enclosed solution with integral protection. It streamlines specification and maintenance while supporting sustainability objectives.

Key Benefits

• IP65 non‑metallic enclosure for enhanced environmental protection.
• Integrated thermal overload relay for motor protection in the 9...12A range.
• START and STOP/RESET pushbuttons for straightforward local control.
• 230VAC 50/60Hz AC coil for compatibility with common control supplies.
• 5.5kW at 400V (AC-3) rating for fixed-speed motor starting.
• UL/CSA 10 HP at 480V rating alongside IEC/EN conformity.
• Operating temperature −25 to +60 °C for dependable performance.

Technical Specification

• Weight: 760 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Direct-on-line starter assembly with contactor and thermal overload relay
• IP65 non‑metallic enclosure
• START and STOP/RESET pushbuttons
• 230VAC 50/60Hz contactor coil fitted
• Product data sheet

Applications

• Fixed-speed motor starting at 400V within 9...12A range
• Installations requiring IP65 enclosed direct-on-line control
• Panels needing local Start/Stop with thermal overload protection
• Projects referencing IEC/EN 60947 and UL/CSA compliance

Safety note: Installation and commissioning must be performed by a qualified person. Isolate the supply before work and set the thermal overload within the 9...12A range to suit the motor.