M0P009124606033 - DOL STARTER M0P009 460/60 2-3 3A

Why Choose the M0P009124606033?

The Lovato Direct-on-line starter M0P009124606033 delivers dependable motor control in a compact, IP65 non-metallic enclosure. Rated 2...3.3A (1.1kW at 400V) with AC-3 performance, it includes a fitted thermal overload relay and front START and STOP/RESET buttons for simple operation. A 460VAC 60Hz contactor coil suits dedicated control circuits in industrial installations.

Engineered for reliability in harsh environments, this direct-on-line motor starter simplifies installation and maintenance while safeguarding motors within its adjustable 2...3.3A range. Compliant with IEC/EN 60947-1 and 60947-4-1 plus UL508/CSA C22.2 n° 14, it supports up to 2 HP at 480V, and operates from −25 to +60 °C for dependable performance across varied UK sites.

Key Benefits

• IP65 non-metallic enclosure resists dust and water for robust protection.
• Integrated thermal overload relay protects motors in the 2...3.3A range.
• Simple control via front START and STOP/RESET pushbuttons.
• AC-3 performance: 3.3A / 1.1kW at 400V for reliable starting.
• 460VAC 60Hz AC coil suits dedicated control supply circuits.
• Compliant with IEC/EN 60947 and UL/CSA standards for assurance.
• Wide operating temperature −25 to +60 °C supports tough environments.
• Rated 2 HP at 480V per UL/CSA horsepower ratings.

Technical Specification

• Weight: 760 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Direct-on-line starter in IP65 non-metallic enclosure
• Integrated contactor with 460VAC 60Hz AC coil
• Factory-fitted thermal overload relay, 2...3.3A setting range
• Front START and STOP/RESET pushbuttons
• Installation instructions

Applications

• Starting and protecting small three-phase motors up to 1.1kW at 400V
• Pumps, fans, compressors and light conveyors
• General industrial machinery requiring DOL starting and local control
• Utilities, OEM panels and maintenance replacements where IP65 is required

Safety note: Install and commission only by a qualified electrician. Isolate power before work, set the overload to the motor’s full-load current, and follow all relevant IEC/UL/CSA standards and local regulations.