M0P0091240075 - DOL STARTER M0P 400/50-60 4 5-7 5A

Why Choose the M0P0091240075?

Lovato M0P0091240075 is a Direct-on-line-starter engineered for reliable motor control and protection in compact installations. Housed in a non-metallic IP65 enclosure, it features an AC contactor coil rated 400VAC 50/60Hz and integrated thermal overload relay adjustable from 4.5 to 7.5A. Simple local operation is provided by dedicated START and STOP/RESET pushbuttons for quick commissioning and safe stopping.

Delivering 3kW at 400V (AC-3 Ie 7.5A) and 5 HP at 480V (UL/CSA), this DOL starter supports dependable service across -25 to +60 °C. Built to recognised standards IEC/EN 60947-1 and 60947-4-1, plus UL508 and CSA C22.2 No. 14, it suits industrial panels needing straightforward direct-on-line starting, robust ingress protection, and straightforward Start-Stop control.

Key Benefits

• Adjustable 4.5–7.5A thermal overload for precise motor protection.
• IP65 non-metallic enclosure resists dust and water ingress.
• 400VAC 50/60Hz AC coil suits standard industrial supplies.
• Start and Stop/Reset pushbuttons enable simple local control.
• Rated 3kW at 400V (AC-3 Ie 7.5A).
• Conforms to IEC/EN 60947-1, 60947-4-1, UL508, CSA C22.2 No. 14.
• Operates reliably from -25 to +60 °C ambient.

Technical Specification

• Weight: 760 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Lovato direct-on-line starter in non-metallic IP65 enclosure
• Integrated thermal overload relay, adjustable 4.5–7.5A
• Built-in Start and Stop/Reset pushbuttons
• Contactor with 400VAC 50/60Hz AC coil
• Mounting and wiring instructions

Applications

• Direct-on-line starting of motors rated 2.2–3kW at 400V
• Motor circuits within 4.5–7.5A full-load current range
• Industrial environments requiring IP65 enclosed starters
• Control panels with 400VAC 50/60Hz coil supply
• Systems needing local Start/Stop and overload protection

Safety note: Installation and setting must be performed by a qualified electrician. Isolate the supply, set the overload to the motor’s full-load current, and follow applicable IEC/EN and local regulations.