M0P009124001V5 - DOL STARTER M0P 400/50-60 0 9-1 5A

Why Choose the M0P009124001V5?

The Lovato M0P009124001V5 direct-on-line-starter delivers straightforward motor control for small loads. Rated 0.9…1.5A (0.37kW at 400V) with AC-3 performance, it uses a 400VAC 50/60Hz coil. A robust IP65 non-metallic enclosure houses the integrated thermal overload relay and clear START and STOP/RESET pushbuttons for safe, reliable operation.

Engineered for dependable performance, this enclosed starter conforms to IEC/EN 60947-1 and 60947-4-1, and UL508 CSA C22.2 n° 14. It supports 0.75 HP at 480V and operates from -25 to +60 °C. With a 760 g build and Sustainability certification, it suits industrial and commercial installations requiring compact, IP65-protected motor starting.

Key Benefits

• IP65 non-metallic enclosure resists dust and water for reliable service.
• 0.9…1.5A setting range matches small motor full-load currents.
• Integrated thermal overload relay protects motors from overheating.
• 400VAC 50/60Hz AC coil simplifies European three-phase applications.
• START and STOP/RESET pushbuttons provide clear, safe operator control.
• Conforms to IEC/EN 60947 and UL508 CSA C22.2 standards.
• Operates from -25 to +60 °C for varied environments.

Technical Specification

• Weight: 760 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Direct-on-line starter unit in IP65 non-metallic enclosure
• Integrated thermal overload relay (0.9…1.5A setting range)
• START and STOP/RESET pushbuttons on front cover
• Downloadable product datasheet

Applications

• Small motor starting up to 0.37kW at 400V (AC-3)
• Equipment requiring 0.75 HP at 480V within UL/CSA ratings
• Industrial and commercial sites needing IP65-protected local motor control
• OEM assemblies requiring IEC/EN and UL compliance

Safety note: Installation and commissioning must be carried out by qualified personnel. Set the thermal overload to the motor’s full-load current and isolate all supplies before maintenance.