M0P0091223075 - DOL STARTER M0P 230/50-60 4 5-7 5A

Why Choose the M0P0091223075?

Designed for reliable motor control, the Lovato direct-on-line starter M0P0091223075 pairs a 4.5...7.5A range with 2.2...3kW at 400V performance. Housed in an IP65 non-metallic enclosure, it features a 230VAC 50/60Hz AC coil and integrated thermal overload protection. Dedicated START and STOP/RESET pushbuttons deliver straightforward local control in demanding applications.

Built to recognised standards, this enclosed starter conforms to IEC/EN 60947-1 and 60947-4-1, plus UL508 and CSA C22.2 n° 14. It supports 5 HP at 480V and operates from -25 to +60 °C, with storage down to -40 °C. At just 760 g, it’s easy to handle and deploy in compliant installations.

Key Benefits

• IP65 non-metallic enclosure for dependable protection in harsh environments.
• Integrated thermal overload relay safeguards motors within 4.5...7.5A range.
• Start and Stop/Reset pushbuttons provide simple, local motor control.
• 230VAC 50/60Hz AC coil suits common control supply voltages.
• Rated 2.2...3kW at 400V (AC3) and 5 HP at 480V.
• Conforms to IEC/EN 60947 and UL/CSA standards for assured compliance.
• Wide operating temperature range from -25 to +60 °C.
• Sustainability certification supports environmental objectives and responsible procurement.

Technical Specification

• Weight: 760 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• Lovato direct-on-line starter in IP65 non-metallic enclosure
• Integrated thermal overload relay (4.5...7.5A range)
• Contactor with 230VAC 50/60Hz AC coil
• Start and Stop/Reset pushbuttons on enclosure cover
• Downloadable manufacturer data sheet

Applications

• Direct-on-line starting of motors rated 2.2...3kW at 400V
• Installations requiring IP65 enclosed motor starters
• Systems using 230VAC control circuits for contactor coils
• Motor circuits needing thermal overload protection within 4.5...7.5A
• Projects requiring compliance with IEC/EN 60947 and UL/CSA standards
• Setups needing 5 HP capability at 480V per UL/CSA ratings

Safety note: Installation and commissioning must be performed by a qualified person. Isolate all power sources before work, set the overload to the motor’s rated current, and comply with applicable standards.