M0P0091223033 - DOL STARTER M0P 230/50-60 2-3 3A

Why Choose the M0P0091223033?

Lovato’s M0P0091223033 is a robust Direct-on-line starter in a non-metallic IP65 enclosure, built for straightforward motor control and protection. Rated 2…3.3A (1.1kW at 400V) for AC-3 duty, it features a 230VAC 50/60Hz AC coil, integrated thermal overload relay, and clear START and STOP/RESET pushbuttons. Delivering dependable performance in demanding settings, it supports UL/CSA 2 HP at 480V and meets key international standards.

Designed for reliability, this enclosed direct-on-line unit conforms to IEC/EN 60947-1 and IEC/EN 60947-4-1, as well as UL508 CSA C22.2 n° 14. It operates from -25 to +60 °C and weighs 760 g, with storage down to -40 °C and up to +70 °C. A Sustainability certification underscores responsible manufacture. Ideal where compact, sealed motor starting with simple Start/Stop and overload protection is required.

Key Benefits

• IP65 non-metallic enclosure for dust-tight, water-resistant protection in harsh environments.
• Integrated thermal overload relay helps protect motors within the 2…3.3A range.
• Clear START and STOP/RESET pushbuttons simplify operation and maintenance.
• 230VAC 50/60Hz AC coil suits common control supply systems.
• Rated 1.1kW at 400V AC-3; UL/CSA 2 HP at 480V.
• Wide operating temperature range from -25 to +60 °C.
• Conforms to IEC/EN 60947 and UL508 CSA C22.2 n° 14.

Technical Specification

• Weight: 760 g
• Operating temperature: -25 to +60 °C
• Storage temperature: -40 to +70 °C

What’s Included

• IP65 non-metallic enclosed direct-on-line starter (SKU M0P0091223033)
• Built-in contactor with 230VAC 50/60Hz AC coil
• Integrated thermal overload relay (2…3.3A rating)
• Front-mounted START and STOP/RESET buttons

Applications

• Direct-on-line starting for motors up to 1.1 kW at 400 V AC-3
• Installations requiring IP65 enclosed starter with non-metallic housing
• Control schemes using 230 VAC coil supply
• Panels needing IEC/EN 60947 and UL/CSA conformity
• Sites seeking simple Start/Stop motor control with overload protection

Safety note: Install and commission only by a qualified person. Isolate all power sources before work, verify the correct 230VAC coil supply, and operate within the stated current, power, and temperature limits.