ADXNF00624 Lovato SOFT STARTER 6A AUX 24VAC/DC NFC

Why Choose the ADXNF00624?

The Lovato Soft Starter ADXNF00624 is an ultra‑compact, two‑phase control solution designed for dependable motor starting. This NFC version includes an integrated by‑pass relay and password functions for controlled setup. Operating across 208…600VAC with a 24VAC/DC auxiliary supply, it provides a 6A rated starter current and motor power ratings of 1.1 kW at 230VAC and 2.2 kW at 400VAC.

With two controlled phases and product type designation ADXNF, this soft starter offers IP20 protection and Pollution Degree 2 for use in protected enclosures. Storage temperature spans −30 to +80 °C. It conforms to IEC/EN/BS 60947‑1 and 60947‑4‑2, UL 60947‑4‑2 and CSA C22.2 n° 60947‑4‑2, with rated motor power reaching 3 kW at 500VAC.

Key Benefits

• NFC version with password for convenient, controlled access to settings.
• Wide 208…600VAC operating range supports varied supply systems.
• 24VAC/DC auxiliary supply eases integration with common control circuits.
• Rated 6A starter current for appropriately sized AC motors.
• Motor power ratings: 1.1 kW at 230VAC; 2.2 kW at 400VAC.
• IP20 protection and Pollution Degree 2 suit protected panel environments.
• Integrated by-pass relay included for straightforward installation and operation.
• Compliance with IEC/EN/BS, UL and CSA standards.

Technical Specification

• Product type designation: ADXNF
• Storage temperature: -30 to +80 °C
• Pollution degree: 2
• IP degree of protection: IP20

What’s Included

• Lovato ADXNF00624 soft starter with integrated by-pass relay
• Quick start guide
• Safety and conformity documentation
• Mounting and wiring instructions

Applications

• Two-phase controlled soft starting for AC motors within stated power ratings
• Panels requiring 24VAC/DC auxiliary supply and IP20 protected devices
• Installations needing NFC configuration with password-controlled access
• Systems operating on 208…600VAC requiring a 6A soft starter

Safety note: Install and commission only by qualified personnel. De-energise all circuits before wiring and use within IP20 and Pollution Degree 2 conditions, following the manufacturer’s documentation and applicable standards.