abb softstarter PSR105-600-70 110-240vac control voltage psr range 105 amp

Why Choose the PSR105-600-70 [1SFA896115R7000]

The softstarter PSR105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

Technical Specification

• Function: Soft start and soft stop with voltage ramp control.
• Rated Operational Voltage: 208 to 600 V AC.
• Rated Operational Current: 105 A.
• Control Voltage: 100 to 240 V AC, 50/60 Hz; control circuit rated at 24 V DC.
• Contact Configuration: Relay outputs for run and bypass signals (normally open).
• Degree of Protection: IP10 (main terminals) per IEC 60529.
• Terminal Type: Main circuit terminals – bars; connecting capacity rigid 1x 10 to 95 mm² or 2x 6 to 35 mm².
• Tightening Torque: Main circuit 8 N·m; control and supply circuits 0.6 N·m.
• Ramp Time Adjustment: Start/stop ramp time adjustable 0 to 20 seconds via front potentiometers.

Trusted By Customers Worldwide

"Specified by UK panel builders for dependable control." Controls Engineer, UK