Lovato BFA02670024 start/delta starter 24 volts AC 22KW 43 Amps

Why Choose the BFA02670024?

Lovato’s Completa BFA02670024 star-delta starter delivers reliable motor starting in an open frame format. With a 24VAC 50/60Hz AC coil, it supports up to 12 seconds starting time and a maximum of 30 operations per hour. Rated to a maximum IEC operating current of 43A and UL/CSA 25HP at 480V, it suits demanding control applications requiring dependable star-delta performance.

Part of the BFA026 designation, this Lovato star-delta starter aligns with IEC/EN 60947-1 and IEC/EN 60947-4-9 for assured compliance. The open frame assembly weighs 1800 g. Supported by a Sustainability certification, it is a dependable choice when specifying star-delta starters with 24VAC coils, defined start timing, and consistent duty up to 30 operations per hour.

Key Benefits

• Open frame type for straightforward incorporation into control assemblies.
• Up to 12-second starting time for controlled star-delta motor starts.
• Maximum 30 operations per hour for consistent, repeatable duty.
• 24VAC 50/60Hz AC coil matches common control voltages.
• Max IEC operating current of 43A supports robust applications.
• UL/CSA 480V rating of 25 HP for suitable motor loads.
• Conforms to IEC/EN 60947-1 and IEC/EN 60947-4-9 standards.
• Sustainability certification supports environmental procurement policies.

Technical Specification

• Product type designation: BFA026
• Weight: 1800 g

What’s Included

• Lovato Completa star-delta starter, open frame (SKU BFA02670024)
• 24VAC 50/60Hz AC coil fitted as specified
• Manufacturer installation and safety information

Applications

• Star-delta motor starting where up to 12-second start is specified
• Installations requiring 24VAC control coils and open frame starters
• Systems operating within 30 operations per hour duty cycle
• Motor loads rated up to 25 HP at 480V (UL/CSA)

Safety note: Installation and commissioning must be carried out by qualified personnel in accordance with applicable standards and the manufacturer’s instructions. Isolate power before work and confirm suitability for the intended duty.