BFK3200A22060 - 3P CONTACTOR 25KVAR 220V 60HZ

Why Choose the BFK3200A22060?

Lovato’s BFK3200A22060 is a contactor for power factor correction with an AC control circuit, engineered for dependable capacitor switching. Delivering up to 25 kVAR at 400 V across three poles, it features a 220 VAC 60 Hz coil and integrated limiting resistors for controlled inrush. The compact unit supports screw or 35 mm DIN rail mounting, helping panel builders streamline installation in LV compensation assemblies.

Built on the BFK32 platform, this Lovato power factor correction contactor offers robust ratings including Ui 690 V, Uimp 6 kV and Ith 56 A, with a mechanical life of 20,000,000 cycles. It operates from −50 to 70 °C up to 3000 m (pollution degree 3) and meets IEC/EN/BS 60947-1/-4-1, UL and CSA standards, supporting sustainability-focused specifications.

Key Benefits

• 25 kVAR at 400 V for reliable capacitor bank switching.
• AC control circuit with 220 VAC 60 Hz coil.
• Integrated limiting resistors reduce inrush current stress.
• Three-pole design for balanced PFC applications.
• Dual mounting: screw fixing or 35 mm DIN rail.
• High insulation (Ui 690 V) and 6 kV impulse withstand.
• Wide −50 to 70 °C operating range and 3000 m altitude.
• Long mechanical life rated 20,000,000 cycles.

Technical Specification

• Product type designation: BFK32
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 56 A
• Terminal tightening torque: 2.5 to 3 Nm
• Weight: 400 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BFK3200A22060 contactor for power factor correction
• Integrated limiting resistors
• Installation and safety instructions

Applications

• Power factor correction capacitor bank switching up to 25 kVAR at 400 V
• Low-voltage reactive power compensation panels and assemblies
• Industrial and commercial distribution boards requiring PFC with AC control
• HVAC, pumping and process systems with utility power factor improvement

Safety note: Install and commission only by qualified personnel. Isolate power before work, observe the specified torque, temperature limits and standards, and use within the rated voltage and kvar.