We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
BFK0910A110 - 3P CONTACTOR 7 5KVAR 110V 50/60HZ
MPN: BFK0910A110
Special Price
£62.65
£52.21
Regular Price
£104.41
Why Choose the BFK0910A110?
Lovato’s BFK0910A110 is a dedicated contactor for power factor correction with an AC control circuit, supplied complete with limiting resistors. Engineered for capacitor switching at 400 V, it delivers 7.5 kvar performance via a 3-pole design with a built-in 1NO auxiliary contact. The 110 VAC 50/60 Hz coil and screw or 35 mm DIN rail mounting make integration straightforward in new builds and retrofits.
Built for reliability, this BFK09 series device offers Ui 690 V, Uimp 6 kV and Ith 25 A, backed by a mechanical life of 20,000,000 cycles. It operates from -50 to 70 °C up to 3000 m altitude and meets IEC/EN/BS 60947-1 and 60947-4-1, UL and CSA standards. A compact 416 g assembly with 1.5 to 1.8 Nm terminal torque supports fast, secure installation.
Key Benefits
- Purpose-built for power factor correction capacitor switching
- 110 VAC 50/60 Hz AC coil for broad control compatibility
- 7.5 kvar at 400 V suits small capacitor banks
- 3-pole main contacts with 1NO auxiliary included
- Limiting resistors included for PFC applications
- Wide -50 to 70 °C operating range for harsh sites
- Screw or 35 mm DIN rail mounting for flexibility
- Conforms to IEC/EN/BS 60947 series for compliance
Technical Specification
- Product type designation: BFK09
- Number of poles: 3
- Rated insulation voltage Ui (IEC/EN): 690 V
- Rated impulse withstand voltage Uimp: 6 kV
- Ith (IEC): 25 A
- Terminal tightening torque: 1.5 to 1.8 Nm
- Weight: 416 g
- Mechanical life: 20000000 cycles
- Operating temperature: -50 to 70 °C
- Storage temperature: -60 to 80 °C
- Max altitude: 3000 m
- Pollution degree: 3
What’s Included
- Lovato BFK0910A110 contactor with limiting resistors fitted
- Built-in 1NO auxiliary contact
- Installation and safety instructions
Applications
- Low-voltage power factor correction capacitor bank switching
- Industrial control panels and electrical switchboards with AC control circuits
- OEM equipment requiring 7.5 kvar capacitor control at 400 V
- Commercial and light industrial facilities improving power factor
Frequently Asked Questions
What is the coil voltage and frequency?
The coil is 110 VAC, suitable for 50/60 Hz operation.
Can this contactor be mounted on DIN rail?
Yes, it mounts via screws or on a 35 mm DIN rail.
What capacitor power can it switch at 400 V?
It is rated for 7.5 kvar at 400 V.
Are auxiliary contacts included?
Yes, it has a built-in 1NO auxiliary contact.
Which standards does it comply with?
It conforms to IEC/EN/BS 60947-1 and 60947-4-1, plus UL and CSA.
Safety note: Install and service only by qualified personnel. Isolate all power sources before work, observe the specified torque and environmental limits, and follow applicable IEC/EN/BS, UL and CSA standards.
| Manufacturer Part Number | BFK0910A110 |
|---|---|
| Manufacturer | Lovato |
| HS Code | 85365080 |
| Barcode | 8013975163030 |
| Coil Voltage | 110V |
Write Your Own Review
