BF0910D220 - 3P CONTACTOR 1NO 9A AC3 220VDC

Why Choose the BF0910D220?

Lovato BF0910D220 is a three‑pole contactor engineered for dependable motor and load switching in industrial control panels. Featuring a 220V DC coil and 1NO auxiliary contact, it delivers 9A AC‑3 performance at 400V and 25A AC‑1 for general duty. With flexible screw or 35mm DIN rail mounting, the BF0910D220 supports straightforward installation and integration for UK OEMs, MRO teams and panel builders.

Built on the BF09 platform, this contactor is rated Ui 690 V with 6 kV impulse withstand for robust insulation. It operates from -50 to 70°C and up to 3000 m altitude, with a mechanical life of 20,000,000 cycles. Certified to IEC/EN/BS, UL and CSA standards and 5 HP at 480V (UL/CSA), it supports secure terminations at 1.5–1.8 Nm, ensuring durable, compliant performance in demanding environments.

Key Benefits

• 9A AC‑3 at 400V for reliable motor switching.
• 220V DC coil for stable control in DC supply panels.
• 1NO auxiliary contact included for status signalling.
• Flexible screw or 35 mm DIN rail mounting.
• High insulation: Ui 690 V, Uimp 6 kV.
• Wide operating range: -50 to 70 °C.
• Long mechanical life rated 20,000,000 cycles.

Technical Specification

• Product type designation: BF09
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 25 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 500 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF0910D220 three‑pole contactor
• Integrated 1NO auxiliary contact
• Manufacturer datasheet and basic installation information
• Original manufacturer packaging

Applications

• Motor starters up to 9A AC‑3 at 400V
• General-purpose switching up to 25 A AC‑1 loads
• Industrial control panels and automation systems
• Pumps, fans and conveyors in manufacturing environments
• HVAC and building services distribution boards

Safety note: Installation must be performed by qualified personnel. Isolate power before working, verify ratings, and tighten terminals to 1.5–1.8 Nm in accordance with applicable standards.