abb softstarter PSTX570-690-70 pstx (690v) range 570 amp

Why Choose the PSTX570-690-70 [1SFA898217R7000]

The softstarter PSTX570-690-70 has a rated maximum operational current of 570 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Technical Specification

• Rated Operational Voltage: 208 ... 690 V AC.
• Rated Operational Current (In-Line Connection): 570 A.
• Rated Operational Current (Inside Delta Connection): 987 A.
• Control Supply Voltage: 100 ... 250 V AC at 50/60 Hz.
• Protection Rating: IP66 (detachable full graphic display), Main Terminals IP00.
• Terminal Type and Size: Main circuit bars, rigid wiring 1 x 2.5 mm² for control circuits.
• Functions: Soft start/stop with voltage or torque ramp, built-in bypass, kickstart, jogging, braking, diagnostics, emergency/fire pump mode.
• Communication: Modbus RTU and TCP, Ethernet IP, Profinet, Profibus, EtherCAT, CANopen, DeviceNet, BACnet.
• Overload Protection: Built-in electronic overload protection with integrated electronic overload and dynamic brake.
• Mechanical Data: Weight 27 kg; tightening torque main circuit 35 N·m.

Trusted By Customers Worldwide

"Specified by UK panel builders for dependable control." Controls Engineer, UK