abb softstarter PSRC60-600-70 psrc range 60 amp

Why Choose the PSRC60-600-70 [1SFA896212R7000]

The softstarter PSRC60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSRC features a two-phase control soft start through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The PSRC softstarter range is a true plug-and-play with a fixed setting optimized for scroll compressors. PSRC is often combined with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSRC is fast and easy to install with fixed settings. Designed for scroll compressors results in less stress on the compressor reducing the maintenance cost to a minimum. The PSRC range are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are compressors.

Technical Specification

• Function: Soft start and soft stop with voltage ramp, two-phase control.
• Rated Operational Voltage: 208 to 600 V AC.
• Rated Operational Current: 60 A.
• Control Supply Voltage: 100 to 240 V AC, 50/60 Hz.
• Contact Configuration: RUN signal relay (normally open), BYPASS relay included.
• Degree of Protection: IP10 (main terminals) as per IEC 60529.
• Terminal Type and Capacity: Main circuit bars, connecting capacity rigid 2 x 0.75 to 1.5 mm².
• Starting Capacity: 4x rated current (Ie) for 6 seconds.
• Mechanical Torque Ratings: Main circuit 8 N·m, control and supply circuit 0.6 N·m.
• Mounting: Plug-and-play design optimised for scroll compressors, easy installation with built-in bypass.

Trusted By Customers Worldwide

"Specified by UK panel builders for dependable control." Controls Engineer, UK