BF8000A024 Lovato contactor 3 pole AC3:80A 45kw 24VAC coil

Why Choose the BF8000A024?

Lovato BF8000A024 three‑pole contactor is engineered for dependable motor control in demanding industrial panels. With an AC3 rating of 80A (45Kw at 400V) and a 24 VAC 50/60Hz AC coil, it delivers consistent switching performance. The BF80 series design supports screw or 35mm DIN rail mounting, streamlining installation while maintaining secure connections for machinery, HVAC and process applications.

Built to international standards including IEC/EN/BS 60947-1 and 60947-4-1, plus UL and CSA, this contactor offers 1000 V rated insulation (Ui) and 8 kV impulse withstand (Uimp). Its rugged construction delivers 15,000,000 mechanical cycles, operates from -50 to 70°C and up to 3000 m altitude. Terminal screws tighten to 4 to 5 Nm for reliable, vibration-resistant terminations.

Key Benefits

• 80A AC3 at 400 V delivers robust motor switching up to 45 kW.
• 24 VAC 50/60 Hz AC coil suits common control voltages.
• Screw or 35 mm DIN rail mounting speeds panel integration.
• High insulation 1000 V Ui and 8 kV impulse withstand.
• Wide operating temperature from -50 to 70°C for harsh environments.
• Long mechanical life rated at 15,000,000 cycles.
• Compliant with IEC/EN/BS, UL and CSA standards.

Technical Specification

• Product type designation: BF80
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 1000 V
• Rated impulse withstand voltage Uimp: 8 kV
• Ith (IEC): 115 A
• Terminal tightening torque: 4 to 5 Nm
• Weight: 1020 g
• Mechanical life: 15000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF8000A024 three‑pole contactor
• Installation and safety information
• Manufacturer datasheet (downloadable)
• Protective packaging for transit

Applications

• Motor starters for pumps, fans and compressors up to 45 kW at 400 V
• Conveyors and material handling equipment control
• HVAC and building services switching
• Industrial machinery and process equipment control
• Panel building with screw or 35 mm DIN rail mounting

Safety note: Install and commission only by qualified personnel. Verify the 24 VAC coil supply, tighten terminals to 4 to 5 Nm, and isolate all power sources before wiring or maintenance.