BF38T4D060 - 4P CONTACTOR NO 56A AC1 60VDC

Why Choose the BF38T4D060?

Lovato’s BF38T4D060 is a four‑pole contactor for dependable switching of industrial loads. With IEC operating current Ith (AC1) of 56 A and AC3 capability of 38 A/18.5 kW at 400 V, the 60 V DC coil ensures secure control. SKU BF38T4D060 mounts via screws or on 35 mm DIN rail, supporting fast, tidy panel installation.

Rated Ui 690 V with 6 kV impulse withstand, the BF38 platform offers durability backed by 20,000,000 mechanical cycles. It operates from −50 to 70 °C, stores from −60 to 80 °C, and is suitable up to 3000 m altitude, pollution degree 3. Compliance covers IEC/EN/BS, UL and CSA standards, with 30 HP at 480 V (UL/CSA).

Key Benefits

• Four poles enable flexible power and control configurations.
• 56 A AC1 rating for reliable resistive load switching.
• 38 A/18.5 kW AC3 at 400 V for motor applications.
• 60 V DC coil suited to DC control circuits.
• Screw or 35 mm DIN rail mounting simplifies panel assembly.
• Wide operating range −50 to 70 °C supports demanding environments.
• Ui 690 V and Uimp 6 kV for strong insulation performance.
• Mechanical life of 20,000,000 cycles reduces replacement frequency.

Technical Specification

• Product type designation: BF38
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 56 A
• Terminal tightening torque: 2.5 to 3 Nm
• Weight: 665 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• BF38T4D060 four-pole contactor
• Manufacturer datasheet or instructions
• Protective packaging

Applications

• Motor control up to 38 A/18.5 kW at 400 V (AC3)
• Resistive load switching up to 56 A (AC1)
• Industrial control panels and machinery
• HVAC, pumps and fans
• General automation and power distribution

Safety note: Install and commission only by qualified personnel. Follow the manufacturer’s datasheet and applicable standards; tighten terminals to 2.5–3 Nm and operate strictly within the stated electrical and environmental ratings.