BF26T0A12060 - CONTATTORE 4P NC 45A 120V 60HZ

Why Choose the BF26T0A12060?

The Lovato BF26 four-pole contactor, SKU BF26T0A12060, delivers reliable control for industrial panels and machinery. Featuring a 120VAC 60Hz coil and four normally closed contacts (4NC), it suits interlocking, isolation and safety circuits. An IEC AC-1 Ith of 45A and UL/CSA 15HP at 480V support robust switching performance. Installation is straightforward with screw fixing or 35mm DIN rail mounting for flexible panel layouts.

Built to endure demanding conditions, the BF26 offers 690 V rated insulation (Ui) and 6 kV impulse withstand (Uimp), plus a mechanical life of 20,000,000 cycles. It operates from -50 to 70 °C and up to 3000 m altitude, with terminals tightened to 2.5–3 Nm. Conformity with IEC/EN/BS 60947 and UL/CSA standards ensures assured performance, while Pollution Degree 3 construction and a compact 500 g build suit modern control panels.

Key Benefits

• 45 A AC-1 Ith rating for reliable resistive load switching.
• 120 VAC 60 Hz coil for straightforward control circuit integration.
• Four NC poles support interlocking and isolation schemes.
• Screw or 35 mm DIN rail mounting speeds panel installation.
• High insulation: 690 V Ui and 6 kV impulse withstand.
• Long mechanical life of 20,000,000 operations for durability.
• Wide operating range: -50 to 70 °C and up to 3000 m.
• UL/CSA motor rating up to 15 HP at 480 V.

Technical Specification

• Product type designation: BF26
• Number of poles: 4
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 45 A
• Terminal tightening torque: 2.5 to 3 Nm
• Weight: 500 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato BF26 four-pole contactor, 4NC (SKU BF26T0A12060)
• Manufacturer product datasheet (downloadable)

Applications

• Control and isolation of resistive loads up to 45 A (AC-1)
• Interlocking and multi-pole isolation using 4NC contacts
• Power distribution and lighting panels with 120 V control circuits
• HVAC, pumps and fans up to 15 HP at 480 V (UL/CSA)
• Industrial automation cabinets with 35 mm DIN rail layouts

Safety note: Install and commission only by qualified personnel. Always isolate power before work, observe the 2.5–3 Nm terminal torque, and operate within specified temperature, altitude and pollution degree limits.