BF1810D060 - 3P CONTACTOR 1NO 18A 60VDC

Why Choose the BF1810D060?

The Lovato BF1810D060 is a robust three-pole contactor designed for dependable motor control and switching. With 18A AC-3 at 400V (7.5 kW) and 32A AC-1 ratings, this DC-coil unit operates on 60 V and includes a built-in 1NO auxiliary contact. It fits screw or 35 mm DIN rail installations, delivering compact performance and reliable operation for control panels and machinery.

Engineered to endure, the BF18 platform offers Ui 690 V, Uimp 6 kV, and an impressive 20,000,000-cycle mechanical life. A broad -50 to 70 °C operating range and up to 3000 m altitude capability support challenging environments (pollution degree 3). It conforms to IEC/EN/BS and UL/CSA 60947 standards, with secure terminals tightened to 1.5–1.8 Nm for dependable connections.

Key Benefits

• Rated 18A AC-3 at 400V, suitable for 7.5 kW motor loads
• 32A AC-1 capability for general-purpose switching duties
• 60V DC coil for reliable control in DC-powered systems
• Integrated 1NO auxiliary contact simplifies control circuits
• Flexible mounting via screw fixings or 35 mm DIN rail
• High endurance with 20,000,000 mechanical operating cycles
• Robust insulation: Ui 690 V and Uimp 6 kV withstand
• Wide operating temperature range from -50 to 70 °C

Technical Specification

• Product type designation: BF18
• Number of poles: 3
• Rated insulation voltage Ui (IEC/EN): 690 V
• Rated impulse withstand voltage Uimp: 6 kV
• Ith (IEC): 32 A
• Terminal tightening torque: 1.5 to 1.8 Nm
• Weight: 500 g
• Mechanical life: 20000000 cycles
• Operating temperature: -50 to 70 °C
• Storage temperature: -60 to 80 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• BF1810D060 three-pole contactor with 60 V DC coil
• Integrated 1NO auxiliary contact
• Original manufacturer packaging

Applications

• Motor control up to 18 A AC-3 at 400 V (7.5 kW)
• General-purpose AC-1 switching up to 32 A
• UL/CSA motor loads up to 10 HP at 480 V
• Control panels using screw or 35 mm DIN rail mounting

Safety note: Install and service only by qualified personnel. Always isolate the supply before work, use within the stated ratings and environmental limits, and tighten terminals to 1.5–1.8 Nm.