Lovato GL0200C1 IEC/EN three-pole switch disconnector 200A

Why Choose the GL0200C1?

Lovato’s GL0200C1 three‑pole switch disconnector delivers dependable AC isolation at 200 A for industrial panels and machinery. With rated insulation voltage Ui 1000 V and impulse withstand Uimp 12 kV, it provides strong dielectric performance. A conditional short‑circuit current of 100 kA with gG/200 fuse protection underpins safety, while full compliance to IEC/EN 60947‑3 and 60947‑1 supports specification and auditing.

Installation is straightforward on a 35mm DIN rail or screw‑mounted plate, with terminals accepting 70 to 185 mm² conductors tightened to 15–22 Nm. The device delivers AC21A/AC22A 200 A up to 1000 V and AC23A 200 A to 690 V (135 A at 1000 V), rated 110 kW at 400 V and 200 kW at 690 V, with 20,000 mechanical cycles and -25 to +55 °C operating range to 3000 m, pollution degree 3.

Key Benefits

• 200 A three‑pole AC isolation for demanding industrial circuits.
• Ui 1000 V and Uimp 12 kV for high dielectric strength.
• AC23A up to 200 A at 690 V for motor loads.
• 100 kA conditional short‑circuit withstand with gG/200 fuse.
• Flexible plate or 35 mm DIN rail installation.
• Wide cable range 70–185 mm², 15–22 Nm torque.
• -25 to +55 °C operation; up to 3000 m altitude.

Technical Specification

• Product type designation: GL
• Number of poles: 3
• Operating voltage type: AC
• Ith (IEC): 200 A
• Rated insulation voltage Ui (IEC/EN): 1000 V
• Rated impulse withstand voltage Uimp: 12 kV
• Operating current Ie AC21A 400 V: 200 A
• Operating current Ie AC21A 500 V: 200 A
• Operating current Ie AC21A 690 V: 200 A
• Operating current Ie AC21A 1000 V: 200 A
• Operating current Ie AC22A 400 V: 200 A
• Operating current Ie AC22A 500 V: 200 A
• Operating current Ie AC22A 690 V: 200 A
• Operating current Ie AC23A 400 V: 200 A
• Operating current Ie AC23A 500 V: 200 A
• Operating current Ie AC23A 690 V: 200 A
• Operating current Ie AC23A 1000 V: 135 A
• Power dissipation per pole (max): 4 W
• Rated operational power AC23A 400 V: 110 kW
• Rated operational power AC23A 690 V: 200 kW
• Conditional short-circuit current (rms): 100 kA
• Short-circuit protection fuse: gG/200
• Making capacity AC23A 400 V: 2000 A
• Breaking capacity AC23A 400 V: 1600 A
• Mechanical life: 20000 cycles
• Terminal tightening torque: 15 to 22 Nm
• Conductor section (IEC): 70 to 185 mm²
• Operating temperature: -25 to +55 °C
• Storage temperature: -40 to +70 °C
• Max altitude: 3000 m
• Pollution degree: 3

What’s Included

• Lovato GL0200C1 switch disconnector
• Printed installation and safety guide
• Manufacturer datasheet (downloadable PDF)

Applications

• Main isolator for industrial control panels and switchboards.
• Load break switching for AC distribution up to 690 V.
• Motor isolation under AC23A utilisation categories.
• Machinery lock‑off for maintenance and safety compliance.
• HVAC and pump systems requiring reliable local isolation.

Safety note: Only qualified personnel should install and commission this device. Isolate the supply before work, fit the specified gG/200 fuse, and tighten terminals to 15–22 Nm using 70–185 mm² conductors.